I could use it box!

[tinhorn97062]

I can use it!

[15meter]

Well at least tomorrow, forgot to check if I had a shipping address before the post office closed today.

[15meter]

And can't find the red loading block so either it's in the box or it fell through a black hole into the unknown

[tinhorn97062]

And can't find the red loading block so either it's in the box or it fell through a black hole into the unknown

No worries...it’s all good!

[tinhorn97062]

Well, the box arrived today. I’ll take an inventory this evening, rummage around for a few things to put back in it, and plan to get it back out Wednesday or Thursday. I’ll post again with the content list when it’s ready to move.

[15meter]

The mailman lied, it was supposed to be there Friday. But it is a long way to California from Michigan.

[tinhorn97062]

Hey guys....this box is ready to move again. I'll be able to get it in the mail Thursday, at the earliest. There were a couple items that had broken/missing packaging. These items were put into a zip lock baggie and labeled accordingly. I noted the changes in the "what's left" list below.

What I took:
~100 Hornady 180 grain spire pt bullets.
1 cavity Lee 90443 457 Round ball mold
Cast MP 358-429 PC & GC boolits (sized .358, weight 160 Gn, med HP, count 25)
Ideal SC - .370 RB Mold

What's left:
Lee 90383 456-220-1R SC
Cast 356-120-tc PC'd boolits (sized: 356, weight: 123.5 gn, count: 25) x 2
Lee .41 LC case trimmer pilot and shell holder
RCBS bench primer handle
Lee 270 RGB 2 die set, no box ** These are now in a zip lock baggie
RCBS .221 Rem die set no box
11 rd Norma 6.5 Jap brass
One set of rainproof Midland GXT rechargable FRS/GMRS cammo hunting radios with home and car charger.
lithium ion rechargeable tactical flashlight battery and charger
Lyman .429 H&I die
18th Century English Musket flint from shipwreck
Lyman #55 powder drop tubes - 4 pcs
Lyman TL JR 6MM 2 die set
A new tourniquet for the 1st aid bag
Eagle .308 Die Set no box original plastic box was destroyed in shipping. ** destroyed plastic box has been discarded, and these are now in a zip lock baggie.
50 .45 ACP once fired Cases
30 .224 Varmint Nightmare HP J Bullets
Lee Autoprime old style large and small primers
RCBS powder trickler ** I taped the handle to the side, to make better use of box space
And the leather thing posted in the pic by its self.
Red gun lock
Wells 22-250 dies no box ** These are now in a zip lock baggie
21 pcs. 450 Marlin brass, Hornady head stamp
25 pcs. 458 Socom brass
RCBS 243 neck die
2 cavity Lee 90285 –think it is 429 dia boolit—44 Mag?
1 cavity Lee 90441 454 Round ball mold
~ 100 Winchester 45 Colt brass cut to Schofield length, used to shoot these in a Trapper to get 10 rounds in the magazine, gun’s gone, don’t need short brass anymore.
4 pewter ingots “round medallions” one plus pound of pewter total.
20+ stripper clips, was told these are for loading 30 carbine magazines, never tried them. ** These are taped together in a bundle
8 M1 Garand clips

What I added:
RCBS .22-250 dies, in green box
Durachrome .44 Mag/Spcl dies, in red box
RCBS Lube Pad, with tube of case lube
50pcs Lee .358-158 RF, as cast from 50/50 COWW/Pb

[firebyprolong]

Tinhorn I could use it. Pm on the way!

[tinhorn97062]

Tinhorn I could use it. Pm on the way!

Pm responded to and the box is heading your way...

[15meter]

Checking my geezer memory, I don't see where I listed 2 boxes of 450 Bushmaster brass, thought I had put that in also old geezer memory.

At least I haven't left the house without my pants yet......

[PHyrbird]

Just a request for clarification: are the Box contents limited to reloading? I'm saving/rounding up stuff needing a new home, but some are things like scope mounts, firing pins, sling swivels, & such. If properly marked in ziplock bag would this type of item be OK for sending forth? Again I'd rather you'ns get good from it than other online (pardon the expression) Bozos. Just trying to stay ahead of the learning curve.... Carl

[Rp-]

Just a request for clarification: are the Box contents limited to reloading? I'm saving/rounding up stuff needing a new home, but some are things like scope mounts, firing pins, sling swivels, & such. If properly marked in ziplock bag would this type of item be OK for sending forth? Again I'd rather you'ns get good from it than other online (pardon the expression) Bozos. Just trying to stay ahead of the learning curve.... Carl

Add it in. I have some of that stuff as well I just fathered after cleaning out my safe a little. Plan on using that around here somewhere as PIF or starting another box for someone.

Sent from my LGLS991 using Tapatalk

[1911sw45]

No it does not have to be just reloading stuff. As long as it is still usable condition and has to do with firearms, reloading, hunting, and not against the law to ship or be in possession of.

[firebyprolong]

Got the box this afternoon, I'll dig around it tonight and see what goodies I can add tomorrow evening.

[firebyprolong]

What I took
Rcbs 22-250 dies
Trickler
Lee auto prime
Leather cheek piece
3 strippers for 30 carb


New in the box.
Wetherby( pacific I think) 270 wetherby die set new
Steel 44 mag Rcbs die set
Rcbs 243 seating die to make a set with the neck die.
50 cal Ammo can to keep the dies safe till it lands next.
One large priming arm for Lyman truline press
One set scope rings
One new elastic butt cuff for 223.
Then I ran outa room.

What's left in the box-

Lee 90383 456-220-1R SC
Cast 356-120-tc PC'd boolits (sized: 356, weight: 123.5 gn, count: 25) x 2
Lee .41 LC case trimmer pilot and shell holder
RCBS bench primer handle
Lee 270 RGB 2 die set, no box ** These are now in a zip lock baggie
RCBS .221 Rem die set no box
11 rd Norma 6.5 Jap brass
One set of rainproof Midland GXT rechargable FRS/GMRS cammo hunting radios with home and car charger.
lithium ion rechargeable tactical flashlight battery and charger
Lyman .429 H&I die
18th Century English Musket flint from shipwreck
Lyman #55 powder drop tubes - 4 pcs
Lyman TL JR 6MM 2 die set
A new tourniquet for the 1st aid bag
Eagle .308 Die Set no box original plastic box was destroyed in shipping. ** destroyed plastic box has been discarded, and these are now in a zip lock baggie.
50 .45 ACP once fired Cases
30 .224 Varmint Nightmare HP J Bullets
Red gun lock
Wells 22-250 dies no box ** These are now in a zip lock baggie
21 pcs. 450 Marlin brass, Hornady head stamp
25 pcs. 458 Socom brass
RCBS 243 neck die
2 cavity Lee 90285 –think it is 429 dia boolit—44 Mag?
1 cavity Lee 90441 454 Round ball mold
~ 100 Winchester 45 Colt brass cut to Schofield length, used to shoot these in a Trapper to get 10 rounds in the magazine, gun’s gone, don’t need short brass anymore.
4 pewter ingots “round medallions” one plus pound of pewter total.
20+ stripper clips 223 for ar mags.
8 M1 Garand clips now taped together
Durachrome .44 Mag/Spcl dies, in red box
RCBS Lube Pad, with tube of case lube
50pcs Lee .358-158 RF, as cast from 50/50 COWW/Pb

Up for grabs. WHO NEEDS IT?

[PHyrbird]

FBPL,
I seem to have seen there is some 450 Bushmaster brass in the boxes, still there? If not some of the items here are of interest, but I've the PIF box in route to me. Perhaps I should give someone else a chance. Thanks,
Carl

[Daver7]

I can use some of that stuff

[Rp-]

Any chance I can get that 243 neck die?

Sent from my LGLS991 using Tapatalk

[firebyprolong]

Sent 1911sw45 a message for a ruling but I'm thinking PHybrid your next.

[1911sw45]

Firebyprolong, confirm with PHybird he wants the box. If not send to daver7.

Adam