I could use it box!

[Rp-]

I emailed the guy about the 223 boxes and he said he was going to have new cutting dies made. He even sent.me.a few more boxes for free for letting him know.

I forgot to check on the spare boxes but I'll check now

Sent from my LM-G820 using Tapatalk

[1911sw45]

Jake McCracken has the I could use it box ready to go. Just say you will take the I could use it box and send him a pm.

[0verkill]

I'm liking the 45 boxes more than the 223 too. I'll have to check out some more of their pistol boxes.

[Rp-]

I've use a lot of 9, 380, 45, and 223. I was able to pickup 2-3 of each box though to try different rounds in. I was able to put 454 rounds in the 40 boxes by folding the flaps a little different and laying them sideways. Found a few other fits as well but don't remember off the top of my head.

Sent from my LM-G820 using Tapatalk

[1911sw45]

The I could use it box is ready to be sent to someone. Just contact Jake McCracken.

[metricmonkeywrench]

I'll take it PM sent...

[Jake McCracken]

I will get it on its way after the new year.

Jake

Sent from my SM-G973U using Tapatalk

[Jake McCracken]

Mailed and PMd tracking info last week. Let me know when it arrives!

Sent from my SM-G973U using Tapatalk

[metricmonkeywrench]

Just pulled back into town after some holiday travel and the box has arrived. I should be able to dig into it in the next few days.

Thanks Jake

[metricmonkeywrench]

The box is back up for grabs, Usual rules- first I'll take it with a PM with the mail to address.

What I took:
RCBS bench primer handle (i put it in a cycle ago, may as well take it out)
Lyman #55 powder drop tubes - 2 (of 4) pcs
Small bottle of Bull Plate
RCBS 41 Magnum dies, old type with decapper on mouth expander die.
Weatherby 270 Weatherby die set new
100X .011 Cu Homemade 30 cal gas checks
4 Garand Buttstock Lube containers

What i found in box not listed:
10 Garand Buttstock Lube containers
1 GI green head mosquito net
1 lee #7 Autoprime Shell Holder
1 AR cloth stripper clip Bandoleer

What I added:
1 7mm Rem Mag Form Die
1 Orange Lyman Case Lube pad (pad is in rough shape)
1 Herters 30-30 Die set
1 Herters 44SPL Die set
1 Herters .243 Visible seat die set (in Hornady bullet box)
1 Herters Cutts Compensator
1 .264 bullet puller collett (unknown make)
1 Grey Handle Large primer pocket reamer
1 Brass primer tube (unknown make)
1 1911 barrel bushing (rough but possibly salvageable)
Couple of MAGPUL stickers
5 small and 1 large black powder primer nipples

Total Inventory:
8pcs 450 bushmaster hornaday brass (found at the range looks once fired)
glenfield 4x15 .22 scope
barska 4x15 .22 scope
1 block of gulfwax parafin
50 wheel weight cast 230gr Lee TL RN 45 (need lubed or powder coated)
B-Square “No gun smith” scope mount for Ruger 22 pistol with bull barrel
Volquartsen comp for Ruger 22 Pistol with bull barrel
2 lithium ion rechargeable 123a battery and charger
Lyman #55 powder drop tubes - 2 pcs (in Form die box)
Lyman TL JR 6 MM 2 die set
Red gun lock
Uncle Mike's #36 IWB holster. Lightly used.
1- 5.56 repack ammo boxes
4x 45 ACP repack ammo boxes
AR carbine handguard w/heat shields (Note: Ruger comp packed in here)
AR aluminum cocking
CVA Scope mount for BP rifle NIB
5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
(Please one each to a delivery as these are handy)
7 ea Starrett Decimal tap&drill cards
5 ea, Metric tap/drill cards (Please one each to a delivery as these are handy)
Ironsighter mount for Remington 760-742 rifles
20 ea-.321 Commercial cast bullets @ 165 gr
20-170 gr .321 cast bullets sized w/ gas check,
Protech holster for Glock 23,30,36 (New)
Viking Tactics Quick adjust sling MK I (New)
Uncle Mikes #13 Large scoped revolver holster
AR Riser
1 US Constitution booklets
20 308 cases; once fired
50 30 cal. hornady gas checks
100X .011 Al Homemade 30 cal gas checks
42X .011 AL Homemade 44 cal gas checks
43X 44 caliber Hornady Gas checks
10X 32 cal. lead ball (.315) (for slugging?)
10X 36 cal. lead ball (.375) (for slugging?)
10X 50 cal. lead ball (.490) (for slugging?)
10X Hornady #4 Buckshot pellets (.240")
10X 44 cal roundballs (.454") (Roundballs stuffed in AR handguard)
Green AR follower
2 Starrett catalogs
Starrett notepad with fractions to decimals to millimeters in back
Partial car cigarette lighter power adapter
4X SMLE 303 Chargers
5X SKS Chargers
1X 8mm Mauser Charger (in Form die box)
2X 223 AR mag spoons
20x 223 AR mag chargers
LEE 10mm case length gauge and shellholder
LEE 357 SIG case length gauge and shellholder
3X AR-15 3 mag pouches. 1 with one divider, 1 with both dividers, one with no dividers
Zippo lighter, no guts but a good hinge I had for a spare.
AK blank firing adapter (in Form die box)
H&K G3 mag
Herter's wad column gauge
SPG lube
No4 Mk1 bolt head, #1,stripped. (in Form die box)
Small magazine, I think possibly a PA-63 (in Form die box)
Tiny craft baggies (in Form die box)
3 unknown trimmer pilots (in Form die box)
1 Sling swivel (in Form die box)
6 Garand Buttstock Lube containers (yellow top, brown goo)
1 GI green boonie hat mosquito net
1 lee #7 Autoprime Shell Holder
1 AR cloth Bandoleer
1 7mm Rem Mag Form Die
1 Orange Lyman Case Lube pad
1 Herters 30-30 Die set
1 Herters 44SPL Die set
1 Herters .243 Visible sie set (in Hornady bullet box)
1 Herters Cutts Compensator (in Form die box)
1 .264 bullet puller collett (in Form die box)
1 Grey Handle Large primer pocket reamer (in Form die box)
1 Brass primer tube (unknown make)
1 1911 barrel bushing (rough but possibly salvagable) (in Form die box)
Couple of MAGPUL stickers
5 small and 1 large black powder primer nipples (in Form die box)

[rdwarrior]

I will take it next. Pm inbound.

[metricmonkeywrench]

Wow, that was fast... off to rdwarrior

[rdwarrior]

Wow, that was fast... off to rdwarrior

I just happened to log in at the right time.
Thanks

[1911sw45]

Glad to see it moving along again. Thank you to all the people that have participated in the I Could Use It box.

[Wayne Smith]

FYI the lead balls are for muzzle loader or cap lock revolvers if they are soft lead. I also shoot 32cal buckshot out of my 32 S&W - the short cartridge.

[metricmonkeywrench]

The 19lb box was sent on its way this morning

[Rp-]

The 19lb box was sent on its way this morning

Say, was that cutts compensator for a shotgun? I have an 870 that has the threaded adaptor but the compensator broke. That might be useful for me.

Sent from my LM-G820 using Tapatalk

[metricmonkeywrench]

Sorry Rp much smaller, rifle or pistol size

[Rp-]

Dang. I had forgotten all about the damn thing until your post. Guess I'll try to track one on eBay.

Sent from my LM-G820 using Tapatalk

[rdwarrior]

Box received today. Hopefully will be able to go through it today or tomorrow, and then decide what I can add based on available room. Will post when it is ready for the next person.