StainLess Steel MediaADvertise hereInline FabricationGraf & Sons
RotoMetals2Titan ReloadingMidSouth Shooters SupplyLee Precision

Donate Now Goal amount for this year: 6000 USD, Received: 4840 USD (81%)
We have reached our goal! Thanks to all who donated! I will be updating the donation bar in the next few days!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 2 of 2

Thread: Hunting Load for '98 Krag

  1. #1
    Boolit Master Throwback's Avatar
    Join Date
    Jan 2009
    Location
    Sebago Lake Maine
    Posts
    287

    Hunting Load for '98 Krag

    Been getting by with the 311299 for years but even though my Krag runs .308300 I found as many of you have that it doesn't matter as the throats are oversized. The 314299 sized .312 is "IT". Larry Gibson's tried and true starting point: 28gr 4895 and a tuft of dacron runs 1,800 fps and shoots inside 6" at 200 yards in my rifle. Your results may vary. I will experiment with a bit higher charge to satisfy curiosity but am more than happy as is.

  2. #2
    Boolit Master
    Join Date
    Mar 2005
    Location
    Westmanland, Maine
    Posts
    574
    My Krag shoots most 30 caliber boolits quite well, but the 314299 gives the tightest groups. I size mine .311 and load it with13.6 to 14.5 grains of 2400 for light loads and 31 grains of IMR 4064 for heavier loads. I tried the 13.6 grain load without the gas check but the groups opened up quite a bit. I have some surplus 4895 so I may try that 28 grain load.
    Maineboy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check