MidSouth Shooters SupplyStainLess Steel MediaTitan ReloadingLee Precision
Graf & SonsInline FabricationRotoMetals2

Donate Now Goal amount for this year: 6000 USD, Received: 4840 USD (81%)
We have reached our goal! Thanks to all who donated! I will be updating the donation bar in the next few days!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 12 of 12

Thread: Retrofitting A Spaghetti Plains Rifle

  1. #1

    Retrofitting A Spaghetti Plains Rifle

    Question for ya, boys:

    I have an out house spaghetti plains rifle from Interarms, probly made back in the 70's when the manufacturers made a lot of these rifles more as toys and novelties - which is pretty much how I shoot this rifle. Patched round balls fly nice with about 55 gr. of the Holy Black, but accuracy falls right off with serious charges. It has that friggin 1:48 twist on it that shoots pretty much everything badly when the powder charges are barked up to serious hunting loads. (Conversely it shoots target weight charges fairly well).

    Does anyone sell after market barrels for these? Mine is a caplock and I love it but boy oh boy... it sure would be nice to shoot a heavy bullet with a heavy charge out in the field.

    Any suggestions are sincerely appreciated! Have yourselves a great weekend - and we'll see ya out there!

  2. #2
    Boolit Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    2,869
    Guy, if you want a different barrel it's probably best to look first at reboring.
    Is yours a fifty? If the rifling is shallow like a TC barrel then it will clean up as a .52 and you can pick your rifling geometry and twist.
    The ball from my old .515 Lyman mold falls out at 206 grains, aint nothing to sneeze at.

  3. #3
    Boolit Master
    Join Date
    Apr 2013
    Posts
    642
    Quote Originally Posted by Guy La Pourqe View Post
    Question for ya, boys:

    I have an out house spaghetti plains rifle from Interarms, probly made back in the 70's when the manufacturers made a lot of these rifles more as toys and novelties - which is pretty much how I shoot this rifle. Patched round balls fly nice with about 55 gr. of the Holy Black, but accuracy falls right off with serious charges. It has that friggin 1:48 twist on it that shoots pretty much everything badly when the powder charges are barked up to serious hunting loads. (Conversely it shoots target weight charges fairly well).

    Does anyone sell after market barrels for these? Mine is a caplock and I love it but boy oh boy... it sure would be nice to shoot a heavy bullet with a heavy charge out in the field.

    Any suggestions are sincerely appreciated! Have yourselves a great weekend - and we'll see ya out there!
    Call Bob Hoyt he will fix your barrel in what ever twist /rebore you need , but ask him (he knows More than Most )

  4. #4
    Boolit Master

    Join Date
    Mar 2005
    Location
    Bloomfield, Nebraska
    Posts
    5,283
    Actually many folks sell fine barrels in the 15/16 you want the problem is fitting it you will need to cut crown breech attach the under rib and lugs cut the sight dovetails and fit sights and then either brown or blue.

    We have don't this to many eyetie guns with great success we also tighten the hook breech. A good barrel will be $100 or more and another 100 for machine and browning.

    If you can do the work yourself look to Track of The Wolf first for parts.

  5. #5
    Thanks a lot boys!

  6. #6
    Boolit Master taco650's Avatar
    Join Date
    Jan 2013
    Location
    OR->LaGrange GA
    Posts
    1,401
    Have you tried shooting the various conicals available for faster twist barrels in it? Also, sometimes they will shoot good with light loads and really heavy loads but everything in between is lousy. What's the biggest load you've tried?

  7. #7
    Boolit Master

    Join Date
    Feb 2006
    Location
    N. Las Vegas, NV
    Posts
    5,812
    You might try some minies. Shallow rifling does better with the.
    Aim small, miss small!

  8. #8
    Boolit Master
    Join Date
    May 2010
    Location
    Chula Vista, CA
    Posts
    938
    If it were me, I would keep that one since it is an old one and has some meaning for you. You can get any number of Hawken style rifles on Gun Broker for little $$$$$$ even if brand new. They generally do not require a FFL to receive them, even in our screwed up state of CA and you can get one to experiment with stock refinish or refinish of the barrel with Ox-Pho Blue or all sorts of things and your "baby" will be safe!
    John

  9. #9
    Boolit Master
    Join Date
    Aug 2009
    Location
    gardners pa.
    Posts
    2,790
    unless that barrel is rotted out it should shoot just fine. one in 48 will shoot round balls just fine if you have the right patch. what is these hunting loads of powder you are talking about? a ball going clean through and bouncing around on the rocks behind the deer will not make them more deadly.

  10. #10
    Boolit Master

    rfd's Avatar
    Join Date
    Feb 2013
    Location
    NJ via TX
    Posts
    2,334
    bobby reamed out a GPR .50 of mine to .54 though it could have gone further to a .58 smoothie. bobby is top shelf, he's done a lot of my gun barrels and chambers, and that's more'n i got fangers.

  11. #11
    Boolit Master
    Join Date
    May 2017
    Posts
    560
    Quote Originally Posted by Guy La Pourqe View Post
    Question for ya, boys:

    I have an out house spaghetti plains rifle from Interarms, probly made back in the 70's when the manufacturers made a lot of these rifles more as toys and novelties - which is pretty much how I shoot this rifle. Patched round balls fly nice with about 55 gr. of the Holy Black, but accuracy falls right off with serious charges. It has that friggin 1:48 twist on it that shoots pretty much everything badly when the powder charges are barked up to serious hunting loads. (Conversely it shoots target weight charges fairly well).

    Does anyone sell after market barrels for these? Mine is a caplock and I love it … but boy oh boy... it sure would be nice to shoot a heavy bullet with a heavy charge out in the field.

    Any suggestions are sincerely appreciated! Have yourselves a great weekend - and we'll see ya out there!
    Guy
    1:48 is a compromise twist - shoot roundball well with moderate charges but none of em seem able to take a proper hunting charge and shoot good (at least none that I am aware of) I would try a LEE minie in it or some of the maxi balls with a good stiff charge, there should be something that will shoot straight and give some punch without a rebarrel .
    I have a 45 flinter with a 1:48 and 55 grains of FFFg black its deadly, - thats a useful load - gets just 1500fps - with 65 grains of the same powder, same everything and ya might as well throw a rock!

  12. #12
    Boolit Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    3,178
    .

    I shoot/hunt with a .45 T/C Seneca that has a 1:48 twist - it shoots T/C Maxi-Hunter conical's accurately, and has put down over a dozen large New England whitetail's over the past years.

    Good 'nuf for me !

    .
    Experience is a wonderful thing - It lets you recognize a mistake, when you make it again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check