yup i know their pretty scarce, id stand tall at 150 plus shipping....
yup i know their pretty scarce, id stand tall at 150 plus shipping....
Wouldn’t it be easier to modify either a .308 or 7.62x54R to fit verses looking for the golden egg laying goose??
Sent from my iPhone using Tapatalk
how would I go about altering a lee loader from 7.62 x54r or 308 to 7.5 ? ive never modded one. Ive got a lathe and mill so im all ears
The lee loader is a neck sizer only. So the 7.62x54r should work ,only the leingth needs to be I thank shortened. Also don’t know if the lee loader in 7.62x54r is set up for 308 or .312 bullets. If it’s set up for .308 bullets no problem . I thank my lee dies in 7.62 x39 full leingth has a 308 and a 312 expander . The 7.62x54r I thank is .308 and I had to buy a 303 Brit expander for it. If the 7.5 Swiss is longer than the 308 neck sizer die you could make a extinsion out of round stock and drill out the center to leingthen the die
Neck sizing portion only needs to match the size of outer diameter of 7.5x55. Either find a match or possibly enlarge one a bit. If it’s a little longer or shorter doesn’t really matter much. Just tap in more or less as needed.
Sent from my iPhone using Tapatalk
Found Sierra #3 book. Outside neck diameter of 7.5x55 matches 7.62x54R. Both .335”. Get yourself a Ruskie Lee Loader!
Sent from my iPhone using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |