ADvertise hereMidSouth Shooters SupplyLee PrecisionGraf & Sons
Inline FabricationRotoMetals2Titan ReloadingStainLess Steel Media

Donate Now Goal amount for this year: 6000 USD, Received: 4840 USD (81%)
We have reached our goal! Thanks to all who donated! I will be updating the donation bar in the next few days!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 8 of 8

Thread: Swede with .268 bore, what j-words do you use

  1. #1
    Boolit Bub
    Join Date
    Jul 2016
    Posts
    49

    Swede with .268 bore, what j-words do you use

    Wanna try j-words, say multiple options on grafs, 1 hornady (160rn) and 2 prvi, (123gr, 139gr BT). Has anyone had good experiences with these in a swede with .268 bore?

  2. #2
    .268 bore is not possible.
    Are you talking a 6.5x55 M-96 Swedish Mauser?
    Bore diameter is nominaly 6,50mm = .256" worn out are about +6,55mm = .258" checked with pin gauges.
    Groove diameter is Nominaly 6,70mm = .264" hard to check, you have to slug your barrel.
    Worn barrels will more likely shoot better with heavy long bore riding bullets like 160 Hornady RN, or Surplus m/41 Ammo cladsteel jackets.

  3. #3
    Boolit Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    16,456
    Groove diameter of most Swede barrels in good to excellent condition 6.5x55s run .266 +/-. At ;east all I've measured do.

    I've found FB jacked bullet of .264 diameter to give better accuracy than BT'd jacketed bullets of the same diameter. I use the Sierra 100 gr HPs and 120 gr SPs. The Hornady 129 SP and the Hornady 140 gr SPs with excellent results. I've no experience with the bullets you list in the Swede.

    I have shot the .268 Hornady 160 gr bullets in a 6.5 Jap that has a .268 groove diameter with excellent results.
    Larry Gibson

    “Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
    ― Nikola Tesla

  4. #4
    Moderator



    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    10,450
    my excellent condition M96 Swede (with micro rear site) barrel had Groove dia of .267
    Using a Lyman 266469 that dropped a boolit at .2685
    I tumble lubed them and sized them with a .268 push through die

  5. #5
    Boolit Bub
    Join Date
    Jul 2016
    Posts
    49
    Yes, m96 with groove dia of .267-.268 when slugged.
    Since barrel is a bit worn and frosty, im trying to find best j-words to shoot in it.

  6. #6
    Boolit Master
    leebuilder's Avatar
    Join Date
    Dec 2014
    Location
    Nova Scotia
    Posts
    950
    You will have to try what holds a group. Some privi j-thingys are .263 so they are lacking. I use the privi 139gr sp in my old rifle, with a dark bore and out of spec headspace with great results.
    I would try a heavy and a light j-thingy with a flat base and see how it groups.
    Be well
    When you read the fine print you get an education
    when you ignore the fine print you get experience

  7. #7
    Boolit Master

    Uncle Grinch's Avatar
    Join Date
    Jul 2005
    Location
    Middle Georgia
    Posts
    1,227
    Hornady used to sell .268 round nose bullets for the 6.5 Carcano. I had several hundred and sold them here on this site.
    Shoot Safe,
    Mike

    Retired Telephone Man
    NRA Endowment Member
    Marion Road Gun Club
    ( www.marionroad.com )

  8. #8
    Boolit Man
    Join Date
    Oct 2011
    Location
    Free America aka north Alabama
    Posts
    98
    In my 96 and 38 Sierra 140 Gamekings and Matchkings always performed well. I even shot my 96 in 1000 yard competitions using the SMKs before I built a 6.5-06 match rifle.
    63/37 Sn/Pb is a terrible boolit alloy but its other use pays the bills.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check