MidSouth Shooters SupplyReloading EverythingInline FabricationWideners
Snyders JerkyLee PrecisionRotoMetals2Repackbox
Load Data Titan Reloading
Results 1 to 19 of 19

Thread: Storing guns in the basement?

  1. #1
    Boolit Master

    Join Date
    Feb 2012
    Location
    Foothills, NC
    Posts
    2,223

    Storing guns in the basement?

    Looking to open up some room in the closet, but the only other place is the basement which runs from 60-80% humidity even running the dehumidifier during the day. Will one of those Golden rod warmers keep the rust away? Seems like warming things up would just make it worse....

  2. #2
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    Bury them in an interior wall with a picture/mirror/? hiding the opening

  3. #3
    Boolit Master


    Join Date
    Oct 2009
    Location
    NH
    Posts
    3,783
    Get a better dehumidifier

  4. #4
    Boolit Man
    PowPow's Avatar
    Join Date
    Apr 2017
    Location
    Maryland
    Posts
    95
    It sounds to me like you've got a substantial amount of moisture down there.

    Have you looked into the source of all of that moisture?
    Do you maintain your gutters?
    Do the spouts drain at a good enough pitch away from your foundation?
    Do you have a good pitch for water run-off in general or can water come downhill towards your home's foundation?
    Do you have any water entering your basement after storms?
    Has your basement ever been flooded?
    Do you have any areas where you have exposed dirt? My in-laws have that in their basement believe it or not, and it increased the humidity.

    An easy thing to try would be a better dehumidifier and/or multiple units. However, the answer probably lies in the answers to the questions above. I had many of the same issues with my basement. It now runs between 35-43% depending on the weather.
    SAF Patron (Life) | GOA (Life) | NRA Benefactor (Life) | MSRPA (Life)

  5. #5
    Boolit Master
    Join Date
    Oct 2014
    Location
    california
    Posts
    829
    Sounds kind of iffy to me.

  6. #6
    Boolit Grand Master

    Join Date
    Oct 2009
    Location
    England,Ar
    Posts
    7,693
    I would be worried about the high humidity.

  7. #7
    Boolit Master
    nicholst55's Avatar
    Join Date
    Jan 2007
    Location
    Houston, TX Metro Area
    Posts
    3,608
    Invest in a decent quality industrial dehumidifier. It IS an investment, because they're not cheap. Also, add an 'air mover,' a floor fan that circulates the air. That increases the efficiency of the dehumidifier significantly. Dri Eaz makes some excellent dehumidifiers, but they are not inexpensive.
    Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call 1-800-273-8255 and Press 1, send a text message to 838255 or chat at VeteransCrisisLine.net/Chat.

    If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline at 1-800-273-8255, text a crisis counselor at 741741 or visit suicidepreventionlifeline.org.

  8. #8
    Boolit Master

    lefty o's Avatar
    Join Date
    Dec 2012
    Posts
    2,187
    inside a safe or small enclosure, a goldenrod will do the job. they will not make the air circulate in a large area however.

  9. #9
    Boolit Master
    JSnover's Avatar
    Join Date
    Dec 2007
    Location
    Sicklerville NJ
    Posts
    4,381
    In any case I'd get down there and clean them a bit more often. That'll buy you some time to solve the problem.
    Warning: I know Judo. If you force me to prove it I'll shoot you.

  10. #10
    Boolit Master
    Join Date
    Apr 2016
    Location
    NC
    Posts
    2,882
    It’d be a disaster.

    You could put them in silicone socks and then inside PVC pipe or large coolers. Add a few desiccant packets to each container. A plastic 55 gal drum might work, depends on how long the guns are obviously. You could also slap together a wood chest. Any of these could be put in the damp basement.

  11. #11
    Boolit Master Handloader109's Avatar
    Join Date
    Jan 2014
    Location
    NW Arkansas
    Posts
    2,527
    Eliminate the moisture. You gave way too much. Mine is bone dry.

  12. #12
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    If the basement is that damp, I would be worried about your houses wood substructure.

  13. #13
    Boolit Buddy
    Join Date
    Apr 2016
    Location
    Central Michigan
    Posts
    238
    The average monthly humidity in Morganton is about 76%. If like my son and you don't have air conditioning with the windows open all the time it's like trying to dehumidify the entire state (think heating a house with all the doors and windows open).
    His solution was to build a small reloading room and put a dehumidifier in there. A friend had a similar problem storing tools in his pole barn. His solution was to build a cabinet/closet and use one of those tiny dehumidifiers.
    The smaller the area you are trying to control the environment in the easier and cheaper it is to do it.
    As JimB mentioned PVC tubing works really good with just a desiccant pack.

  14. #14
    Boolit Master

    Join Date
    Feb 2012
    Location
    Foothills, NC
    Posts
    2,223
    Thanks for all the thoughts. Keep them coming. The basement has a poured floor and block walls. We have A/C in the living space and keep everything closed up. There is no standing water or wetness that you can feel with your hands. A local friend with similar construction runs his dehumidifyer 24/7, I can hear ours at night and it bothers my sleep, so I put it on a timer to only run during the day, with it running the humidity drops into the high 50's then creeps up into the 70's over night. I did turn it off while we were on vacation as we have had several condensate pumps fail. Counting the basement, our house is 3 levels, and I think it acts like a chimney sucking air into the basement despite my efforts to seal everything up. It has also been a very wet summer. I haven't noticed any significant mold or rust on my tools but would hate to rust up my guns.

  15. #15
    Moderator Emeritus


    Join Date
    Mar 2005
    Location
    SW Montana
    Posts
    12,474
    At 60% humidity you start to see condensation on the walls. Get your numbers rechecked or get different venting.
    [The Montana Gianni] Front sight and squeeze

  16. #16
    Boolit Master
    Join Date
    Apr 2009
    Location
    North Dakota
    Posts
    529
    Borrow a sling hygrometer[pshchrometer] that will tell the true amount of humidity you have in your house. Do not shut the ac off to the basement as ac unit is a large dehumidifier.

  17. #17
    Boolit Master
    marlin39a's Avatar
    Join Date
    Apr 2010
    Location
    Paulden, Arizona
    Posts
    1,426
    For a brief time in 1994, I was force to store my firearms in a basement in Massachusetts . I coated hem with Breakfree Collector. It worked fine for the few damp months.

  18. #18
    Boolit Master Hannibal's Avatar
    Join Date
    Sep 2013
    Location
    East of KCMO
    Posts
    2,212
    50 percent humidity is about maximum for tool/firearm storage. I prefer to keep mine 40 - 45 percent.

    First thing I would do is find out if your numbers are accurate. You are going to have a devil of a time keeping the moisture out with block walls. A dehumidifier is going to have to run 24/7 to keep the moisture down because it's going to be wicking moisture in 24/7.

    You'll have to figure out how to leave your dehumidifier on constantly or I'd abandon this as unrealistic. As others have said, you still need to address the moisture level or you'll sustain structural damage over time.

    Step one is still verify the humidity level.

  19. #19
    Boolit Master


    David2011's Avatar
    Join Date
    Jan 2007
    Location
    Baytown Texas
    Posts
    4,106
    Quote Originally Posted by MT Gianni View Post
    At 60% humidity you start to see condensation on the walls. Get your numbers rechecked or get different venting.
    Depends on the dew point as to when you will see condensation. If the walls or items in the room dip below the dew point the humidity will condense on the cool items.

    I'm using a Goldenrod for the humid days but most of the year is 40% or lower here. It can get very high though, all the way to a foggy 100%. Most of the time freshly machined steel doesn't rust here. The story will change dramatically when we move to the Houston area in a few weeks.
    Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check