MidSouth Shooters SupplyADvertise hereTitan ReloadingInline Fabrication
Lee PrecisionStainLess Steel MediaRotoMetals2Graf & Sons

Donate Now Goal amount for this year: 6000 USD, Received: 4840 USD (81%)
We have reached our goal! Thanks to all who donated! I will be updating the donation bar in the next few days!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 11 of 11

Thread: New Remington Conversion- Made my first Cylinder!

  1. #1
    Boolit Mold Tinker Pearce's Avatar
    Join Date
    Aug 2017
    Location
    Seattle, WA.
    Posts
    2

    New Remington Conversion- Made my first Cylinder!

    I've been doing cartridge conversions as part of my amateur(ish) gunsmithing hobby. It's a sickness that started with using Kirst Gated Conversions and progressed to boring out C&B cylinders, then lining them for smaller calibers. Recently though I got my hands on a chunk of 4340 H/H round bar and had a go at making my first cylinder for a reproduction Remington 1858, just to see if I could.

    I turned it down on the lathe, then cut the sprocket for a five-shooter because the standard cylinder isn't large enough for six rounds of a .45-caliber cartridge. Then I located and cut the locking notches and timed the cylinder. With that done I line-bored the cylinder, then ran a chamber-reamer in from the other end.
    Click image for larger version. 

Name:	wz3SLpC.jpg 
Views:	19 
Size:	60.1 KB 
ID:	225209Click image for larger version. 

Name:	KNr1cNU.jpg 
Views:	21 
Size:	59.8 KB 
ID:	225210

    I chambered it for .450 Adams, since I already reload that for some of my antiques and it's a nice, low-pressure load. I made this for a conversion I had done previously in .44 Colt (original.) Results have been good; makes for a nice, soft-shooting gun that is accurate and a pleasure to shoot. The .44 Colt conversion has moved on to a new home in another gun, BTW; waste not, want not and all that.
    Click image for larger version. 

Name:	GUGhDvJ.jpg 
Views:	32 
Size:	102.8 KB 
ID:	225211Click image for larger version. 

Name:	LmcaCfv.jpg 
Views:	31 
Size:	138.2 KB 
ID:	225212

    This opens a whole new world of possibilities- I've already turned and timed a new cylinder for a Colt 1851 reproduction, a six-shot that will be chambered for .38 S&W (I line the bore with .357 liner.) Anyway, it was a fun and interesting project and I thought I would share it.
    Then one night as my car was going backwards through a cornfield at 90 mph I had an epiphany...

  2. #2
    Boolit Master


    Nueces's Avatar
    Join Date
    Dec 2006
    Location
    Texas Hill Country
    Posts
    1,729
    Tres cool. If you lived closer I'd have a drone outside your shop window filming your procedures.

  3. #3
    Boolit Master
    Join Date
    Jan 2010
    Location
    Tom, VA
    Posts
    4,297
    Wonderful! Thanks for posting, and welcome to the forum.

  4. #4
    Boolit Master

    Join Date
    Mar 2005
    Location
    wv
    Posts
    294
    Good work sir!

  5. #5
    Boolit Master




    EMC45's Avatar
    Join Date
    Jun 2007
    Location
    East TN Mountains...Thanks be to God!
    Posts
    3,908
    WOW! That is a cool little beast!
    You can miss fast & you can miss a lot, but only hits count.

  6. #6
    Boolit Master

    DougGuy's Avatar
    Join Date
    Apr 2013
    Location
    just above Raleigh North Carolina
    Posts
    4,854
    That's nice looking work but have you given any thought to Osammy's Executive Order 7/22/2016 making your hobby gunsmithing work into manufacturing? It carries a hefty $2000.00 fee and is retroactive by BATFE. That's the reason I quit taking in conversions, because it clearly enhances the capability of the weapon beyond what the manufacturer's original product did. No way out of that one, the language is specific.
    Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throat reaming? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? Shoot me a PM! Also on Facebook: https://www.facebook.com/Cylinderhone-756429174391912/

  7. #7
    The Brass Man Four-Sixty's Avatar
    Join Date
    Feb 2011
    Location
    Georgia
    Posts
    389
    Can anyone cite the EO number?
    Last edited by Four-Sixty; 08-10-2018 at 07:54 PM.
    “Useful undertakings which require sustained attention and vigorous precision in order to succeed often end up by being abandoned, for, in America, as elsewhere, the people move forward by sudden impulses and short-lived efforts.”

    Alexis de Tocqueville

    The human mind has a primitive ego defense mechanism that negates all realities that produce too much stress for the brain to handle. It's called denial.

    "Inferno" Dan Brown

  8. #8
    Boolit Master

    Join Date
    Apr 2014
    Location
    Way up in the Cascades
    Posts
    2,173
    Nice workmanship and an interesting project. Is the rammer functional on that short of a barrel? Seems like the handle on the rammer is a bit short to grasp for sufficient ramming force -- just the impression I get looking at the photo. Of course, one doesn't need to ram a ball into a cartridge cylinder, and so that makes me think, like on the Richards Mason conversion, why retain the rammer on the modified design?

    I think it's still legal for one to make a gun for their own use.

    By the way, another "welcome to the forum". Always glad to see new people with knowledge and talent join the club!!

  9. #9
    Boolit Master
    Join Date
    Feb 2007
    Location
    The deep south,... of Vermont!
    Posts
    4,819
    A very cool project, one I would love to own myself, well done!

  10. #10
    Boolit Master
    Join Date
    Sep 2013
    Location
    MI (summer) - AZ (winter)
    Posts
    3,037
    Beautiful work and I greatly appreciate the machining and thought put in to it. Well done!

    Doug - your comments bring up a good point. In my ignorance, I'll ask . . . if a person buys a Kirst conversion and converts a handgun - with a gate, installed back plate, etc. - does that also fall under that regulation? I'm assuming if I buy a Howell cylinder and throw it in to a Remington, it doesn't because nothing has been done to the original handgun as it can easily be converted back to C & B?

    I haven't called the powers that be here in MI yet to find out how they work it since cartridge handguns have to be registered in this state. Technically, I can go in and buy a C & B, put cash down and no paperwork because the reproduction is considered an "antique firearm". However, if I put a Howell conversion cylinder in it it becomes a cartridge handgun. On your own property, no biggie - but if on the way to a range and stopped, with the Howell cylinder in it it would be considered an "unregistered handgun".

    Not to detract form the OP's post though - Tinker, you did a great job on it and be proud of your work! Since you obviously have access or have nice machinery to work with - have you done any cartridge conversions (change calibers) on single shots or relined any rifle barrels or does you equipment limit you to handguns?

  11. #11
    Banner Sponsor

    lar45's Avatar
    Join Date
    Mar 2005
    Location
    Arkansas
    Posts
    1,325
    Excellent work and very nice little beast.
    I'd love to shoot that one.
    Welcome to the forum.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check