I've been looking at buying a bullet mold to start reloading for my new (to me) 45-70 H&R handy rifle I've got.
I narrow it down to the following Lee molds:
1. Lee 0.457 cal, 340gr
2. Lee 0.457 cal, 405gr
3. Lee 0.459 cal, 405gr
I prefer the 340gr from the less lead usage for savings; but if the 405gr is the way to go, which one of the #2 or #3 above should I go for? The 0.459 cal, 405gr is hollow base as opposed to the others that are flat based.
Any suggestions?
Thanks for the advice.
Camba