What about using Flitz or Simichrome as a lube on paper patched added right before firing? I’ve never pp’d, but seems good at least in theory …
Sent from my iPhone using Tapatalk
What about using Flitz or Simichrome as a lube on paper patched added right before firing? I’ve never pp’d, but seems good at least in theory …
Sent from my iPhone using Tapatalk
[QUOTE=Hannibal;4425475]Your last sentence makes my entire point.
your point was ?????
your statement was if it wont shoot there is nil chance to make it better - thats baloney - polish it up and there is a good chance to make it much better - I have done several and it works
If you did it and it didnt work - ya didnt do it right - if ya never tried it - maybe one day ya should before callin me a BS artist
Some people did not read the OP. The fellow says "It shoots good." So he has a very real chance of making it worse.
If they are pits, there really is no other way to remove them without enlarging the bore.
If it is shooting well now, then I would say, "Leave it be, and shoot away."
IF the pits are causing leading, then maybe the paper patch route will stop that.
Amendments
The Second there to protect the First!
I’ve fire lapped a lot of guns with frosty bores, and even a few with good (even new) bores that “shot OK,” but did not shoot as well as I thought they should, after extensive testing. In no instance did any of them shoot worse after the treatment than before, and in most cases there was a marked improvement in accuracy and ease of cleaning.
Lapping of any sort will not “remove” pitting of any real depth, but it will polish and round the edges of the pits so they are less efficient at stripping lead off the passing boolit.
Of course, one has to do it properly. The original method of “pressure (fire) lapping” propounded by Merrill Martin in Precision Shooting has been mutated into a dozen variants by other writers, most of which will not improve things much and may do real harm. Prominent among these techniques are vigorous application of bore mops saturated with abrasives, rapid-fire of abrasive-coated lead boolits, use of abrasive-coated jacketed bullets, and that all-time classic, lapping of an untested new barrel by the customer who assumes he knows more than the barrel maker about what constitutes “the Ultimate in rifle accuracy.” These individuals, after messing things up, lose no time informing others that fire lapping is “no good.”
I’ve never tried paper patched boolits through a cruddy bore, but I would think that any abrading would be done to the patch and boolit, rather than the bore. Appreciable wear, or loss of accuracy, on modern barrels by paper patches (the blackpowder kind, anyway) has only been noted by a few competitors, and not until ten thousand or more shots have been fired. Even the old soft barrels were only shot out by market hunters who killed thousands of animals. Many of the old competitors’ rifles, properly maintained, still reportedly shoot well.
I don’t think I’ve fired more that 150 fire lapping rounds through a barrel before accuracy testing leveled off to “as good as it gets,” and generally 50 or 100 shots, over several sessions, is enough.
Last edited by Bent Ramrod; 08-05-2018 at 10:23 AM.
I was just asking if anyone had any remedies. But the rifle performs fine. It's my favorite rifle for mine but it's the only one with alot of putting. I read that pits dont matter on a forum somewhere, not here. A guy said as long as the beginning of the chamber and end of barrel/muzzle is clean , even with pits, good accuracy is still possible. It seems to be doing good so far.
Patch lap or fire lap. Clean real well and then oil and enjoy the ol girl.
You can miss fast & you can miss a lot, but only hits count.
Waaaaal I am 6 from 6 with my "vigorus application of bore mop" so far .....did I get lucky 6 times in a row ??....maybe .......or maybe if you pay attention there is something to it? .....BUT ....I use polish and very fine steel wool NOT heavy abrasive .....Valve grinding paste ? I DONT THINK SO!
Certainly agree if it aint broke dont mess around fixin it - also there are a lot of hamfisted blokes out there that can mess up the simplest of mechanical tasks
Would I recommend the OP attack his 86 ? probably not - it aint broke !
Was it mine would I ? more n likely - an If I did I bet london to a brick its shoots better or fouls less or both after I done it
Howsoever I dont include meself in "hamfisted blokes" ------
have read about "fire lapping" - never done it - based on reading the method I prefered the brush - dumb ? maybe but I dont think so - stubborn ? definitely yes
Last edited by indian joe; 08-05-2018 at 06:39 PM.
Well Kev, looks like you have answers to your question. Question is now ... are you dissatisfied enough to desire the gamble of messing with it or shoot it as is.
Seems like there is a few options if messing with it is in order. All depends on how mechanical you are as to whether it seems advisable.
I have lapped a few black powder muzzle loaders and had marvy results. I got easy cleaning and rounded the edges of the pits so they did not tear up my patch's, this resulted in better accuracy ... however ... bear in mind that a muzzle loader can handle thicker patch in the event of over scrubbing and thinning the rifling.
Even if it's pitted, if it shoots OK I personally wouldn't worry about it. If it doesn't shoot, then the other options are available.
Like has been said before, what are your expectations?
If it already loose, lapping will make it bigger and "possibly" make it worse. If tight, it will probably help.
Sometimes the only recourse is lining or a new barrel. Of course, that will depend on if originality is to be maintained or not. Some guns will not affect the value, others may greatly change the value.
Like I said before, it is a judgement call on your part as the gun is yours and not someone else's.
Ronnie
The last barrel I did was out of an original 73 - it was a borderline shooter but pretty untidy so we rebarreled the rifle, but I was reluctant to toss the old tube - I slugged the old barrel and it came out on spec (.401) I shined it up with the steel wool brush and jewellers rouge and slugged it again after wards - still measured on spec at .401 - the big difference was that second slug went through so much easier and the land and groove markings on it were smooth and shiny compared to the first one (both were pure lead round ball) - I fitted that barrel up to a 92 action I was working on at the time and shot it - no more flyers !!!! Its been setback two threads and the old chamber cut out also took about 3/8 th inch off the muzzle and recrowned - I had a new barrel coming for the 92 so I polished the old one up on the outside gave it a touch up blue job and stashed it full of grease - on the lookout now for another original with a wrecked bore ......
Bottom line ---I could not measure any "make it bigger" effect from my lapping procedure - but I dont use agressive cutting compound either - just the finest steel wool and POLISH.
I to Denver reading about a product that was supposed to fill in pits can't tenner what it was called. Recently read some speculation about weather bore coat would work on potted notes not sure if the manufacturer they make note clean and now bore coat i believe it is supposed to reduce barrel fouling and the talk about using it for pits was just speculation. Other than something like that the only way to get rid of it is to remove material. If you can see Pitts clearly then the amount of material need to be removed would definitely be excessive. My advice is just shoot it and enjoy.
I would choose/use any method suggested...
But the key here is to never look at the bore again after
At home remedies for a dark pitted bore are far and few between.
"Can't hurt the bore any worse than it already is. If the rifle has decent accuracy ignore those pittings__ clean the barrel as best you can than enjoy shooting the old girl. Otherwise__ it will plaque up nice to enhance any Man Cave's {or Den} wall.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |