SEEKING INTEREST- 4 cavity Ingot molds

**Hossfly** · 09-11-2018, 09:18 AM

Thanks for the update, wish you luck with your job.

**Camper64** · 09-11-2018, 10:33 PM

As of right now, I'm showing 48 members with a total of 83 molds (5 hb, 77 cb).

**RogerDat** · 09-12-2018, 07:29 PM

Appreciate the status update. My mom always said delayed gratification built character. So while you take care of the clearly higher priorities in your world we can all kick back and build us some character

**kingstrider** · 09-14-2018, 09:39 PM

I would be down for a hillbilly gold mold. I'd want 2 of them if they have the same markings as the CB mold (pure, lino, WW and other).

**Mjdd23** · 09-14-2018, 10:05 PM

I would like to have one with the CB logo please. Thanks.
Mark

**wendyj** · 09-15-2018, 06:00 AM

I'd like to have a couple of the CB molds

**Wayne S** · 09-15-2018, 08:50 AM

I'd be in for 2 HBG OR plain. Ponder on making them with an "ear" either on one end or one side just big enough for a pair of "vice grip" or other pliers to hold the mold for emptying

**Sghinds** · 09-15-2018, 01:38 PM

Depending on cost I’d be in for a CB.

**Went2kck** · 09-15-2018, 02:07 PM

I would go for a Cast bullet mold

**BigHoss74** · 09-17-2018, 05:46 AM

I'm interested in 2 CB logo

**oldhenry** · 09-17-2018, 10:37 AM

I'd be interested in a CB logo.

Henry

**glockky** · 09-17-2018, 11:17 AM

I would be in for at least 1 CB logo mold. Maybe 2 depending on price.

**Dieselhorses** · 09-17-2018, 12:02 PM

The 64k question is "what is the dimensions of each brick"? I have a wall bin with 128 sections, 4.5" wide by 7.5" high. Makes it easier to sort. (It holds around 1700 lbs)

**Omega** · 09-17-2018, 12:31 PM

Originally Posted by Dieselhorses

The 64k question is "what is the dimensions of each brick"? I have a wall bin with 128 sections, 4.5" wide by 7.5" high. Makes it easier to sort. (It holds around 1700 lbs)

First post shows that 12 fit snuggly into a SFRB (5.3/8 X 8.5/8 X 1.5/8), you can probably get an idea of the dimensions from the pic showing how they fit.

**Dieselhorses** · 09-17-2018, 01:04 PM

Originally Posted by Omega

First post shows that 12 fit snuggly into a SFRB (5.3/8 X 8.5/8 X 1.5/8), you can probably get an idea of the dimensions from the pic showing how they fit.

10-4 thx

1 CB 4 me pls!

**kevin c** · 09-17-2018, 09:53 PM

I did some guesstimates in post 78.

**45workhorse** · 09-17-2018, 11:49 PM

Two CB for me.

**kevin c** · 09-18-2018, 04:28 AM

I think we're right around a hundred molds now, if those who have posted commit to buy around $25 a unit. Pretty fast. The price would be even better if we push the total up to 150 or 200, though it's hard to know at this point if there is that much interest.

**JSnover** · 09-18-2018, 02:14 PM

Originally Posted by kevin c

I think we're right around a hundred molds now, if those who have posted commit to buy around $25 a unit. Pretty fast. The price would be even better if we push the total up to 150 or 200, though it's hard to know at this point if there is that much interest.

If we can confirm 100@$25, might be time to start the signup thread, give it enough lead time to get some more folks on board.

**kevin c** · 09-20-2018, 12:03 PM

Lakehouse will get the cost estimate to us when he can, but the man needs to deal with higher priorities at the moment.

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: SEEKING INTEREST- 4 cavity Ingot molds

Thread Tools

Posting Permissions