I'm needing a neck expander die that I can use to neck 9.3x57mm Mauser up to .400-.410 caliber to help solve a issue I've been having. I've looked at by RCBS and Lyman dies, but I'm not sure what will work for what I'm needing. Suggestions?
I'm needing a neck expander die that I can use to neck 9.3x57mm Mauser up to .400-.410 caliber to help solve a issue I've been having. I've looked at by RCBS and Lyman dies, but I'm not sure what will work for what I'm needing. Suggestions?
______________________________________________
Aaron
Last edited by Grmps; 08-01-2018 at 04:49 PM.
It seems like they usually have what I need, lol. Thanks!
______________________________________________
Aaron
I have used one of these in 30cal with good results.
https://www.midwayusa.com/product/96...21-404-caliber
I was looking to expand the necks of brand new .416 Weatherby Mag brass up to .458 so I could use it in my .460 Weatherby Mag. I found CH4D makes a tapered expander plug specifically for this purpose. I picked up the .40 to .45 expander plug and it worked perfectly.
Check the link below for the plug with the range you need:
http://www.ch4d.com/products/dies/expanding/tmp
The Lyman M die works well for for my neck expanding needs and are easily customized.
T
Regards
John
I have several home made tapered expanding rods that fit into a standard 7/8x14 die body so that I can neck expand annealed cases in gradual steps. (28 to 30, 30 to 338, 338 to 35, 35 to 375, etc.) I use them lots!
I may have passed my "Best Before" date, but I haven't reached my "Expiry" date!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |