WidenersMidSouth Shooters SupplyGraf & SonsRotoMetals2
Inline FabricationTitan ReloadingStainLess Steel MediaLee Precision
Repackbox
Results 1 to 6 of 6

Thread: How I Roll

  1. #1
    Boolit Master



    Join Date
    Mar 2005
    Location
    Nashvegas, TN
    Posts
    1,386

    How I Roll

    I have a good bit of Prismatic Powder I. Sage I bought on sale a year or two ago. It costs great. Here is how I coat...

    I use the container the BBs came in. I throw my powder and a double handful of bullets in. Put the top on and shake for a minute. If they aren't coated good put more powder in, shake longer, or both.

    Sent from my SM-G930V using Tapatalk
    At one with the gun.

  2. #2
    Boolit Master



    Join Date
    Mar 2005
    Location
    Nashvegas, TN
    Posts
    1,386
    This is what it looks like coated. It's ready to separate the BBs and bullets.

    Sent from my SM-G930V using Tapatalk
    At one with the gun.

  3. #3
    Boolit Master



    Join Date
    Mar 2005
    Location
    Nashvegas, TN
    Posts
    1,386
    I use a perforated thin metal tray I got from the grilling section at wal mart. It is small enough to set inside of a plastic bowl. Pour about half into the perforated tray and jiggle it back and forth. The BBs fall out of the bottom into the bowl. Dump that into your tray lined with nonstick aluminum foil and then do the other half.

    Sent from my SM-G930V using Tapatalk
    At one with the gun.

  4. #4
    Boolit Master



    Join Date
    Mar 2005
    Location
    Nashvegas, TN
    Posts
    1,386
    I shake the baking tray a little to get rid of the pile of bullets from where you dumped them. It is fine if they touch. Trust me- it's ok.

    I bake mine at 16 minutes on 400 degrees.

    When you take them out all of the bullets will be stuck together. Separate them by rolling your gloved hand over them. They separate very easy and do not restick fo each other. Even if some do not break apart (which will happen) it's not the end of the world. They come apart easily when cooled and still shoot fine.

    Sent from my SM-G930V using Tapatalk
    At one with the gun.

  5. #5
    Boolit Buddy am44mag's Avatar
    Join Date
    Jun 2017
    Location
    NE Texas/SE Oklahoma
    Posts
    469
    I'll have to give that a try. Thanks!
    ______________________________________________
    Aaron

  6. #6
    Boolit Master


    Walter Laich's Avatar
    Join Date
    Aug 2005
    Location
    Cypress, Republic of Texas
    Posts
    3,094
    I've learned the hard way to be sure to get all the BBs out. They melt into a little mess if you miss one or two

    once they have cooled you can get them off pretty easily though
    NRA Life
    USPSA L1314
    SASS Life 48747
    RVN War Games, 2nd Place

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check