G.I Mags on Auto-Ordnance TM1

**pworley1** · 07-21-2018, 09:02 PM

Are any of you using stock G.I. mags on an Auto-Ordnance TM1? If so, did you have to make any changes to the mags?

**Texas by God** · 07-22-2018, 09:21 AM

If the gun mentioned won't work with GI mags then it's the gun's problem. Send it back.

**oldsman** · 07-22-2018, 11:22 AM

no they will not lock up, for info search at machinegunboards.com ,they have a lot of info on the thompsons
it has something to do with the hole on the side of the mag

**pworley1** · 07-22-2018, 02:06 PM

Thanks

**Texas by God** · 07-22-2018, 03:06 PM

I thought you were talking about the M1 carbine by A-O/Kahr; my apologies.

**pworley1** · 07-22-2018, 06:24 PM

No problem, It looks like I just need to file the top of the mag catch hole until it seats correctly.

**rockrat** · 07-22-2018, 07:55 PM

yep, you have to elongate the latch hole a bit.

**m.chalmers** · 08-05-2018, 02:48 PM

Or put a USGI mag catch in it. To open USGI mags up on a drill press in takes 20 seconds. It will take much longer to take the mag a part an clean the shavings out.

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: G.I Mags on Auto-Ordnance TM1

Thread Tools

G.I Mags on Auto-Ordnance TM1

Posting Permissions