I recently found a Winchester 1892 in .32-20 made in 1894. I took it to the range today and found that it doesn't chamber a round. It will bring a round up, and then it seems to hang there and won't go forward. It does the same with my 115 grain handloads or 100 grain factory ammo. It does however, chamber if the gun is title on its right side. It will not if you tilt it to the left.
I took a photo with a dummy round to show where the round stops. I wonder if it could be the loading gate as I know these tend to be an issue, if so, what would be the solution? The screw is tight so not sure if the loading gate is simply worn out or not.