MidSouth Shooters SupplyStainLess Steel MediaADvertise hereInline Fabrication
Titan ReloadingRotoMetals2Lee PrecisionGraf & Sons

Results 1 to 8 of 8

Thread: Please help me

  1. #1

    Please help me

    I have a Rossi youth combo for my son. Tried to shoot the 22 barrel and hammer falls but no marks on shell from firing pin. Why and how can this be fixed. Called Rossi and wasnt happy, this gun hasnt had 500 rounds through it. Gun is around ten years old, it lives in my safe most of the time. Has anybody seen this before?

  2. #2
    Boolit Master
    Join Date
    Sep 2005
    Posts
    361
    I would look at the mechanism that changes the hammer from a centerfire strike to a rim fire strike as the first source of possible malfunction.

  3. #3
    Boolit Master


    nagantguy's Avatar
    Join Date
    Mar 2013
    Location
    MI
    Posts
    2,310
    Off the top of my head; I also had a Rossi youth combo in 22 mag and 12 gauge barrels, same thing happened years ago I remember it being that a small hard piece of crud was wedged in tight and wouldn’t lay the firing pin go forward, it was an easy fix but then it happened again so it got traded off

  4. #4
    Boolit Master



    skeettx's Avatar
    Join Date
    Jul 2009
    Location
    Amarillo, Texas
    Posts
    2,542
    Hello Birddog896,
    WELCOME on your first posting

    See manual
    http://www.rossiusa.com/pdf/rossi_ma...le_shotgun.pdf

    Is the safety on??
    I am used to single shots with NO SAFETY and sometimes forget
    to unsafe the Rossi

    Mike

    more stuff
    https://www.youtube.com/watch?v=kCkCx6JYJuY

    https://www.youtube.com/watch?v=uMlUI7zum34
    Last edited by skeettx; 07-13-2018 at 06:39 PM.
    NRA Benefactor 2004

  5. #5
    Boolit Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    4,271
    Break the barrel, turn safety off, cock hammer, holding the trigger back ease the hammer down while looking at the hole the firing pin should come through.

    Did it?

    Many of these rifles have transfer bars, where if you release trigger too soon the firing pin does not get hit.
    Second possibility is safety.
    Third is a broken fireing pin.

    Sit down and eyeball that action, figure it out. Where is the problem?
    You can DO this!

  6. #6
    Boolit Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    4,813
    Quote Originally Posted by junkbug View Post
    I would look at the mechanism that changes the hammer from a centerfire strike to a rim fire strike as the first source of possible malfunction.
    The Rossi uses one firing pin for rim and center fire cartridges. The rimfire barrel is bored eccentric to allow this.
    Examine it as Ghosthawk describes- My Matched Pair .22&.410 has been flawless with lots of use.It's an early issue non safety model.

  7. #7
    Boolit Master


    Join Date
    Sep 2009
    Location
    The Lowcountry
    Posts
    219
    Broken firing pin!!
    It happened to my sons gun, 22/410 combo. I had a friend make me new firing pin, out of a piece of stainless steel.
    My son would go through a brick of 22's in a weekend! Been a few years. He is twenty now and STILL likes single shot rifles.

  8. #8
    Boolit Master



    curator's Avatar
    Join Date
    Mar 2006
    Location
    Fort Myers, Florida
    Posts
    1,261
    The Rossi and H&R break-open rifles should not be dry fired. A broken firing pin will result. Not necessarily the first time, but sooner rather than later. Having a spare firing pin or two is a good idea.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check