StainLess Steel MediaGraf & SonsTitan ReloadingLee Precision
MidSouth Shooters SupplyInline FabricationRotoMetals2ADvertise here

Results 1 to 11 of 11

Thread: 9mm under 900 FPS?

  1. #1
    Boolit Mold
    Join Date
    Aug 2015
    Location
    Portland, OR
    Posts
    2

    9mm under 900 FPS?

    The indoor range I belong to requires lead bullets @ 900 fps or less at the 50í range. Easy enough for my 45acp, but for the life of me, I canít find a load for my 9mm. Looked at the load data sticky here, but no joy. Figure it would have to be a heavy (145 gr +) bullet to have enough back pressure to eject the brass, but am not sure. Anyone know of a spot that would have my info? PMs with pet loads that meet the criteria accepted. Thanks ahead of time.

    -veep

  2. #2
    Boolit Master Thumbcocker's Avatar
    Join Date
    Oct 2007
    Location
    East Central Illinois
    Posts
    2,242
    Lyman loading manual with 147 grain data.
    You'll go far providin' you ain't burnt alive or scalped."

    Will Geer as Bear Claw in "Jeramiah Johnson"

  3. #3
    Boolit Master Grmps's Avatar
    Join Date
    Jul 2016
    Posts
    2,333
    slower - heavier


  4. #4
    Boolit Master
    Join Date
    Aug 2005
    Location
    South Jersey
    Posts
    4,978
    145 grain Lead RN (Round Nose)
    * No. 2 3.7 gr. 893

    147 grain FMJ or JHP
    * Universal 3.7 gr. 851
    No. 2 4.0 gr. 888
    Regards
    John

  5. #5
    Boolit Master tazman's Avatar
    Join Date
    Jan 2014
    Location
    west central Illinois
    Posts
    4,370
    The hodgdon data site shows a few loads for 125grain and heavier using starting loads. Most are with 147grain Bullets
    Last edited by tazman; 07-13-2018 at 07:36 PM.

  6. #6
    Boolit Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    8,638
    You might look at the websites for bullseye pistol, there may be some "soft ball" loads for the 9mm they use in matches. But you may need to use a lighter recoil spring in the pistol with these loads.

  7. #7
    Boolit Master
    Join Date
    Feb 2015
    Posts
    640
    Any starting load with a 140-147 grain bullet should be fine. It depends on the gun but there's a good chance you can go even a bit lower than the starting load and the gun will still function.

  8. #8
    Boolit Mold
    Join Date
    Aug 2015
    Location
    Portland, OR
    Posts
    2
    Thanks to all of you for your input. You folks are great, It is appreciated!
    - Veep

  9. #9
    Boolit Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    5,812
    I load 147-grain bullets with 3.2 grains of Bullseye, very accurate in SIG P320 and cycle reliably.
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  10. #10
    Boolit Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    4,273
    I recently tested my Hipoint C9 pistol with 8 rounds of 125 gr rnfp over 2.5 grains of Red Dot.

    You'd have to chrono them but that is half a grain below start.

    Pistol ran like a champ, accuracy was ok, mostly out of practice with it.

    I actually screwed up and shot them backwards. 8 low cast rounds followed by 5 federal factory loads.

    Should have shot the federals first.

    Recoil and muzzle blast was significantly less with the light loads. I then came home and loaded up 100 like that, labeled in their own box.

  11. #11
    If I recall correctly my 156gr flat point http://castboolits.gunloads.com/show...Hitek)-for-9mm on top of 3.3gr wsf averaged 814 from a g17 and shot very well and functioned perfectly in multiple glocks from a little 43 to a 34.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check