RotoMetals2ADvertise hereLee PrecisionGraf & Sons
Titan ReloadingStainLess Steel MediaMidSouth Shooters SupplyInline Fabrication

Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: thurty-thurty

  1. #21
    Boolit Master

    Join Date
    Apr 2007
    Location
    Tampa, FL
    Posts
    256
    Well - these have worked for me. Any good cast bullet of 160 - 180 grains, gas checked, over 19 grains of H 4198, for about 1600 fps in my short trapper barrel; or 16.5 grains of IMR 4227 for 1450 fps. (Ditto for 11 grains of Alliant Steel).

  2. #22
    Boolit Master
    Tom W.'s Avatar
    Join Date
    Mar 2005
    Location
    Phenix City, Alabama
    Posts
    2,634
    I didn't take a picture, but yesterday at the SO range I shot twelve shots into a small hole @25 yards from an improvised rest with a load of 5 gr. Bullseye, a LR magnum primer, a Lee 160 gr.gc bullet sized to .309 and lubed with two different coats of plain JPW. I think I'm going to make some more and try them at 50 yards next time. My mold is the first one I bought for a smokeless powder rifle, an old single cavity Lee. It's no longer available in single cavity, but I did see it on the website as a DC.
    Tom
    μολὼν λαβέ

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check