RotoMetals2Lee PrecisionStainLess Steel MediaInline Fabrication
WidenersGraf & SonsMidSouth Shooters SupplyTitan Reloading
Repackbox
Page 2 of 2 FirstFirst 12
Results 21 to 28 of 28

Thread: Need advice on 1887 Winchester 10 Gauge ASAP!

  1. #21
    Boolit Buddy Kev18's Avatar
    Join Date
    Aug 2017
    Location
    Canada
    Posts
    231
    Quote Originally Posted by Drm50 View Post
    I read somewhere that 87 is wire twist 12 or 10g. The 1901 was avaible with choice of barrel steel
    and 10g only. I have several Levers and Single Shots from BP days. I load all them with light
    loads of smokeless and cast bullets. A steel barrel is a different animal than a wire or ribbon twist
    shotgun barrel but you still have to use common sense. I don't know anyone who blew up a old
    rifle. I know several guys who blew up twist barrels. I hear the same old story they shot store
    bought shells in it for years. That may be true but it finally lets loose and one could at any time.
    I have also seen revolvers from BP days with cracked cylinders from smokeless loads.

    I had a beautiful Austrian SxS 16g wire twist. I turned a couple dummy shells out of stainless and
    bored them for 410. I have a buddy that has a German 10g single barrel. It's got steel barrels
    but short chambers. I believe he was able to buy shells off a specialty outfit in Minn.
    Well I noticed that track of the wolf has 10 gauge 2 7/8 shells for sale but way over, my price range! I guess il buy normal 3 inch high brass and unload, and cut them to length. The add bp!

  2. #22
    Boolit Buddy Kev18's Avatar
    Join Date
    Aug 2017
    Location
    Canada
    Posts
    231
    Also I was wondering, why do they say 2 7/8 shells. Wouldnt 2/34 work also? Unless they dont make any in 10 gauge. First 10 I ever owned...

  3. #23
    Banned
    Join Date
    Jun 2018
    Posts
    76
    Okay, my last comment on this.

    Here are the facts. As I mentioned DGJ is the absolute bible on the subject.

    "I know a lot of people online that shoot damascus-barreled shotguns. Some of them shoot thousands of rounds a year, year after year. Yet the conventional wisdom holds that this is inherently unsafe; damascus barrels blow up! Others will reluctantly concede that if you really must shoot these old guns you should only use Black Powder, because modern propellants are stronger than black powder. That much is true; they are more powerful… but all that really means is that you need to use less of them to produce the same pressure/velocity.

    Of course not all black powder is created equal. Load 3-1/2 drams of FFFFg black powder under a 1-1/4 ounces of shot and you could be courting disaster. The same amount of FFg and shot and it will probably be as safe as anything would be. This is because the smaller grains of FFFFg have more surface area so they ignite more quickly, resulting in higher pressures that build faster.

    But smokeless powder has a different pressure curve! Well, yeah… unless it doesn’t. The following test was performed with modern, state of the art equipment.

    “The Double Gun Journal, Volume Seventeen, Issue 4, Winter 2006. “Wall Hanger Rendezvous & The Slow Powder Myth” pages 39-40 by Sherman Bell.

    Sherman Bell pressure tested a 1 1/4 ounce load of 3 3/4 drams GOEX FFFg vs. Blue Dot both at 1240fps – results:

    @ 1″ from breech – black = 5900psi Blue Dot = 6000psi
    @ 6″ from breech – black = 4100psi Blue Dot = 4300psi
    @ 12″ from breech – black = 2100psi Blue Dot = 2300psi ”

    In the remainder of the article he discusses down-bore pressure curves in detail; it’s worth reading. Back issues can be obtained from http://Doublegun.com

    Considering that proof loads run 16,000 to 18,000 psi a difference of two hundred this low in the range is trivial. Several other powders yield similar pressure curves, others- notably powders tailored for pistols- yield higher pressures, but then these are not powders people normally load into shotgun shells.

    Manufacturers could and did ‘Nitro Proof’ damascus shotgun barrels. So where did the folklore of damascus barrels being unsafe come from? Well, like any steel these barrels have elastic limits, and if you overcome those the steel will split. Apparently back at the dawn of the twentieth century some reloaders loaded shells with the same volumes of powder they were used to using when they switched to smokeless powder. As noted nitro powders are more powerful, and loading this way could easily produce pressures that could cause a barrel to fail. This was common enough that catalogues and literature of the period specifically warned against this.

    Of course any barrel can fail even with safe loads if the barrel is obstructed. A squib load can leave a barrel blocked and if not noted the next shot will almost certainly cause a catastrophic failure.

    Another culprit can be extending the chamber to accommodate longer shells- this can place the forcing cone in a thinner, weaker portion of the barrel. Not a good thing. Similarly guns were sometimes over-honed to remove pitting or for some other dubious advantage. If the steel is too thin it’s going to split, no matter what kind it is.

    But perhaps the biggest culprit in spreading this rumor were the manufacturers themselves. ‘Fluid steel’ (homogenous steel) barrels were a great deal less expensive to produce, and manufacturers were eager to claim they were an improvement- less because they were than because if they were ‘better’ they could charge the same price that they did for more expensive damascus barrels and thereby increase their profits. There are numerous ads from these manufacturers- who just a decade before had sworn by damascus barrels- that suddenly claimed that they were unsafe. Ah, marketing; thou art a fickle beast.

    The last argument I have heard, usually from people that really should know better, is that smokeless powders are unsafe because they are a ‘High Explosive.’ A high explosive has a burn-rate that exceeds the speed of sound. Touch it off and it goes BOOM even if in an open, unconfined area. Smokeless powders have combustion inhibitors to prevent them from doing this. They are most definitely not high explosives.

    This is not to say that all guns are safe with all loads, and any 100 year old gun should be carefully evaluated before firing it. It is also prudent to restrict these old guns to low-pressure loads, though less because of concerns about splitting the barrels than to avoid accelerating wear on a gun that has already had a full working life- or two, or three. Any antique firearm should be carefully inspected, ideally by a competent gunsmith, before use.

    Honestly while I could tell you how to test an antique I dare not. In this litigious age if someone was injured through mis-applying those instructions I could easily be sued. I can tell you a few things to check to see if it is worth having it examined by a competent gunsmith. Examine the bores inside and out. If it is severely pitted, if there are any visible rings, bulges or dents you have a problem. If the barrels are loose on the frame when locked you have a problem. If you separate the barrels and ‘ring’ them you should not hear any vibration or buzzing; this would indicate that the rib was separating from the barrels. Not only is this commonly caused by bulging a barrel, it can allow moisture to enter and corrode the barrels unseen. Examine the rib and make sure there are no gaps in the solder for the same reason. If the gun appears sound by this inspection it could be worth actually paying someone to examine it further.

    One thing to check is the chamber length- in some gauges standard shells were shorter than today’s ammunition, and using modern-length shells can cause an unsafe pressure condition in these old guns. A gunsmith can determine this for you. This doesn’t mean that you cannot use the gun; if there is enough metal ahead of the chamber a gunsmith can lengthen the chamber for you. Another option is to load your own ammunition to the proper length.

    Damascus, Fluid Steel or whatever, respect the gun, it’s limitations, your own safety and that of those around you. If you have any doubts, well, it’s far less troublesome to consign a gun to ornamental status than it is to live without a hand or an eye.

    Addendum: RST specializes in low-pressure shells, including 2, 2-1/2 and 2-3/4 inch shells specifically for use in old guns. http://www.rstshells.com/store/default.aspx "

  4. #24
    Boolit Buddy Kev18's Avatar
    Join Date
    Aug 2017
    Location
    Canada
    Posts
    231
    Turns out I wont be buying this thing anytime soon. The guy said he looked online... on gun broker and he saw one for 15,000$ so he's pretty aroused by high prices now. I told him id be interested in the 1000$ range. He wants to put it online for 4-5 thousand. keep in mind he paid it 50$. He has a"gunbroker" looking a the gun for him and his gunsmith is supposed to come in today.

  5. #25
    Boolit Master

    Join Date
    Mar 2005
    Location
    Bloomfield, Nebraska
    Posts
    5,347
    The real weakness in the 87 01 leverguns is not so much the twist barrels but the thin walled receiver and how the stress is applied to them. Invariably the cracks occur through the thin side walls right through the big W. I have a special fixture made up to held the cracked receivers from warping as we weld them up. I have had and shot a lot through these old guns and they are good shooters albeit somewhat dangerous as the hammer spur is guaranteed to slip from your thumb sooner or later. I only lever in a round when I am on target and then leave the empty in place till the next shot. The other reason the old guns blew up was Dupont semi smokeless powder, It deteriorated whit age and was not particularly stable, showing a lot of shot to shot variation. I worked with it some and in a modern gun velocities would vary as much as 3-400 fps with the same measured loads.

  6. #26
    Boolit Buddy MOA's Avatar
    Join Date
    Feb 2012
    Location
    Mobile, Alabama, formally from Arizona Territory.
    Posts
    594
    Kev18, sorry to hear about the gun shop owner going brain dead on you. I just looked at GB and they only list two winchesters in the configuration you are desiring. One is a 1887 in ten gauge, the other is the model 1901 in ten gauge. The 1887 is looking at around 1,100 and the 1901 around 1,000. The model 1901 is made for smokeless powder. Why not get the 1901 from Gun Broker and let this dude stew in his long time no sell gun he thinks is going to net him a bunch of money. After you get it take it down to his store like your looking for a gun case, of course he just doesn't have what your looking for so you will have to try cabelas or somewhere else and just watch him simmer. Be sure to tell him to have a great day when you leave.

    My just arrived today about two hours ago.
    Click image for larger version. 

Name:	Photo0826.jpg 
Views:	4 
Size:	56.5 KB 
ID:	223919
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20180719_095332.jpg 
Views:	9 
Size:	43.4 KB 
ID:	223913  
    Last edited by MOA; 07-19-2018 at 02:37 PM.

  7. #27
    Boolit Buddy Kev18's Avatar
    Join Date
    Aug 2017
    Location
    Canada
    Posts
    231
    Quote Originally Posted by MOA View Post
    Kev18, sorry to hear about the gun shop owner going brain dead on you. I just looked at GB and they only list two winchesters in the configuration you are desiring. One is a 1887 in ten gauge, the other is the model 1901 in ten gauge. The 1887 is looking at around 1,100 and the 1901 around 1,000. The model 1901 is made for smokeless powder. Why not get the 1901 from Gun Broker and let this dude stew in his long time no sell gun he thinks is going to net him a bunch of money. After you get it take it down to his store like your looking for a gun case, of course he just doesn't have what your looking for so you will have to try cabelas or somewhere else and just watch him simmer. Be sure to tell him to have a great day when you leave.

    My just arrived today about two hours ago.
    Click image for larger version. 

Name:	Photo0826.jpg 
Views:	4 
Size:	56.5 KB 
ID:	223919
    Nice! They look great. And I like the way you think too. I definetly would go back if id buy some.

    Also I cant buy from GB im Canadian and I think those are american... Its really hard to find sites in Canada that have vintage firearms. I know one or two but you'll pay double or triple for the gun because "its in canada""You know how much these sell for in the states!? like atleast totally 1500$ so 4000$ Canadian is a bargain!" The struggle of being a canadian firearm enthusiast. If you want a cheap price I need to go to gun stores and get lucky on a clerk that dosent know anything aboutt eh gun and rip them off. Sounds like im an **** but its how it is. Of course some are reasonably priced, but 90% of people have feelings for their guns even if its a store. Sorry I cant afford and/or want to buy your feelings.

  8. #28
    Boolit Buddy MOA's Avatar
    Join Date
    Feb 2012
    Location
    Mobile, Alabama, formally from Arizona Territory.
    Posts
    594
    Well Kev,
    Here's my pair. I wouldn't mind running across a model 1901 in 10 gauge, but I think it will be awhile so I'll just be working on my loads for these two.

    Last edited by MOA; 07-27-2018 at 03:17 PM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check