CLOSED - MP .227 -65 GN GC/ PB 6 Cavity Brass or 8 Cavity Aluminum 223/ 5.56 Nato

[bluejay75]

MP .227 -65 GN GC/ PB 6cav Brass or 8 Cavity Aluminum 223/ 5.56 Nato

Last Call. Please review your orders and notify your friends that this one will close soon.








This one will remain in Group Buy Discussions until we hit 5 commitments. We need 10 to put it into last call.

Designed by 45 2.1, its a VERY proven design. Miha already has the cherry for this one, just need buyers! This is a Boolit that is run as regular inventory on the website, and is the most popular 22 caliber boolit in his line up.

This will be a single crimp groove, GC/ PB brass or aluminum mold that is suitable for the 223, 5.56 Nato and has a proven record for accuracy and game taking ability.

Would be available in 6-cav Solid Brass, or 8-cav Solid Aluminum. (Choose GC or PB)

It needs 5 buyers to commit to this thread before it goes active, and 10 buyers gets Miha cutting molds

Features:

- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Weights, ready to load:

Solid 68 gr PB 65 gr GC

Solid NLG should be near 75 grains

Diameters .227

Prices are with shipping included, below.

- 6 Cavity solid Brass 95 Euro's (80,75 Euros with discount)
- 8 Cavity solid Aluminum 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your info in the following way: (user name) (disguised email) (type of mold) (Gas check or Plain base) (zip code)


6 cavity Solid, Brass mold with (GC or PB)
1) paska_10at hotmaildott comm- .227-6 Cavity-GC-
2) vfluckey at midco dot net .227- 6 cav- GC -57110
3)
4)
5)
6)

8 cavity Solid, Aluminum mold with (GC or PB)
1)
2) whytelw AT comcast DOT net- 8 cav aluminum PB 95124
3) hicard21atoutlookdotcom- 8 cavity aluminum PB mold- 96055
4) readr1 at yahoo dot comm- 8 cavity aluminum GC mold -76020
5) vfluckey at midco dot net- .227-8 Cavity-PB
6)robert dot davisson at comcast dot net- 8 cavity aluminum GC mold

6 cavity Solid, Brass mold with (GC or PB) NLG- No Lube Groove
1) vincent dot guillen at gmail dot com- - .227-6 Cavity-PB-NLG
2) rd232d at yahoo dot com- - .227-6 Cavity-PB-NLG+ HANDLES-98007
3) jbpaul AT suddenlink DOT net - - .227-6 cavity brass-GC-NLG
4) Emmypaul9 aT liVE dot c o m- - .227-6 Cavity-GC-NLG-43460
5) C (underscore) Bevan aTt ya hoodot com- - .227-6 Cavity-GC-NLG
6) rd232d at yahoo dot com- - .227-6 Cavity-PB-NLG+ HANDLES-98007

8 cavity Solid, Aluminum mold NLG- No Lube Groove with (GC or PB)
1) middle earth sales and service at gmail dot com- .227-8 Cavity-GC- No Lube Grooves
2) eddymartinez13 at gmail dot com- .227-8 Cavity-GC- No Lube Grooves
3) middle earth sales and service at gmail dot com- .227-8 Cavity-GC- No Lube Grooves
4) greg (((att))) watch mans tower ((dott)) comm - .227-8 Cavity-GC- No Lube Grooves-65552
5) pauldotadotshoemaker1atgmaildotcom- 227-8 cavity-GC-No Lube Grooves- 28326
6)Hogan At Arctic dot net- .227-8 Cavity-GC- No Lube Grooves 99504
7)
8) Ortho N P Beau @ y a H o o dot com- .227-8 cavity-PB-No Lube Grooves -37031
9)rocpyro at gmail- - .227-8 cavity-PB-No Lube Grooves- 76116- + HANDLES
10)gvanzeggelaar at yahoo.ca- 8 Cavity Aluminum PB-No Lube Grooves-N0J1P0
11)
12)middle earth sales and service at gmail dot com- .227-8 Cavity-GC- No Lube Grooves
13)bzajdek atttt hotmailllll dottt commmmm-- .227-8 Cavity-GC- No Lube Grooves 02893
14)aLBrooms aT ComcasT doT NeT-.227 8 cavity Solid, Aluminum mold NLG- No Lube Groove with GC -35633
15)

[rsterne]

I assume you mean 65 gr. with lube groove and 69 gr. with no lube groove?.... 4 gr. difference for a GC seems excessive....

Bob

[bluejay75]

I assume you mean 65 gr. with lube groove and 69 gr. with no lube groove?.... 4 gr. difference for a GC seems excessive....

Bob

This is a bore out of the GC to make the PB. Im sure 3-4 grains is a fair estimate of additional weight.

[jmort]

Big surprise here, 8 cavity gas check NLG
middle earth sales and service at gmail dot com
You got this up fast
Will be interested to see if the 1 in 9 barrel can deal with this right on the edge
I suppose if it is not stabalized it might prove to be very effective against Goblins

[Teemu]

I'm in 6-cavity Brass GC. Thanks

paska_10at hotmaildott comm

[alicevirgin]

I'm down for 6 cavity brass NLG pb
vincent dot guillen at gmail dot com

[Smoke4320]

That bullet w/grooves and GS and PC'ed shoots great in my Sig 516 Patrol 1:7 twist

[jmort]

Good to know. Excited to get this 8 cavity mold.
Two more and it goes active.

[Mr_Sheesh]

1:9 twist, 22" barrel bolt gun, would the LG GC version be happy PC'ed? Varminter but that's for closer in shots...

[jmort]

From @DFK

"The 75gr NATO from Mihec drops around 69-70gr with my range scrap alloy. . The lube groves are small if you axe them and keep the gas check (I'd keep the gas check) you'll maybe add 2 grains to it. Which is more than acceptable weight wise. The 75gr NATO is not much longer than the 65gr version."

So it should work well as the buy is for the 65 grain version which comes in at 75 grains in the NLG in this buy for Hi Tek or PC. Same length as the 65 grain. You could just get the lube groove version in this buy and you will be Golden, either way. It is all about length, not weight. Length is the same. So if you use Hi Tek or PC the NLG is what you want. A proven performer. I cannot wait to get this mold. Well proven.

[Mr_Sheesh]

Hmmm, OK; I haven't used brass molds yet (LOTS of 1- and 2-cavity iron ones and some Al) - Have to figure out which to grab, hmmm

[Hamish]

Will be interested to see if the 1 in 9 barrel can deal with this right on the edge
I suppose if it is not stabalized it might prove to be very effective against Goblins

I shot a inch and an eighth group at 100Y sitting in 45 2.1's yard with my 1-9 twist AR with this bullet over WC844 at a chrono'd 2450 fps before the first GB. I've not messed with it much since then but I'm pretty sure it would shoot better than that with even cursory load testing,,,,,

BUY IT.

[jmort]

This just adds to the many reasons why to buy this mold.
The 8 cavity will be perfect for me
I am on the list.

[Mr_Sheesh]

rd232d at yahoo dot com- - .227-6 Cavity-GC-NLG

[shortlegs]

Bought this mold used from a member, looks like it was never used. I heat cycled it last nite after reading this thread. Cast a few and it is fantastic. Boolits drop easily when mold is opened, rarely needing persuasion to fall from mold. Boolits dropping around 62 grs. , should be about 65 with gc & lube.

[DAFzipper]

Bought this mold used from a member, looks like it was never used. I heat cycled it last nite after reading this thread. Cast a few and it is fantastic. Boolits drop easily when mold is opened, rarely needing persuasion to fall from mold. Boolits dropping around 62 grs. , should be about 65 with gc & lube.

What is the diameter?

Sent from my LG-H700 using Tapatalk

[shortlegs]

.227 with my 50/50 alloy.

[gvanzeggelaar]

gvanzeggelaar
gvanzeggelaar at yahoo.ca
8 Cavity Aluminum PB No lube grooves
N0J1P0

[jmort]

From my count we are at 5
So active now, yes ???

[bluejay75]

Yes sir. Our mod is on vacation so I will try to figure out how to move the thread. I’m on the road as well. Will post updates this evening.