Titan ReloadingGraf & SonsInline FabricationMidSouth Shooters Supply
RotoMetals2StainLess Steel MediaADvertise hereLee Precision

Results 1 to 5 of 5

Thread: Home Swaged 32 WadCutters Working Out Well

  1. #1
    Boolit Bub
    Join Date
    Oct 2010
    Posts
    32

    Home Swaged 32 WadCutters Working Out Well

    Greetings,

    I recently machined a mould to produce slugs for swaging. The reason for this is that you can experiment with different alloys.

    My testing has shown that there is little difference in group size between Pure Lead, salvaged 22lr metal, and 20:1 alloy.

    The slugs cast out at 101.5 grains. I then swage them down to 100 grains, if possible. The targets posted used as cast slugs weighed and swaged in a Core Seat die (no bleed hole). I have since made several die bodies of different diameters with bleed holes.

    Here are some typical groups fired at 50 yards in a barrel tester.

    Click image for larger version. 

Name:	BK32.0014.jpeg 
Views:	12 
Size:	63.3 KB 
ID:	223613Click image for larger version. 

Name:	BK32.0018.jpeg 
Views:	13 
Size:	62.3 KB 
ID:	223614Click image for larger version. 

Name:	BK32.0021.jpeg 
Views:	14 
Size:	63.0 KB 
ID:	223615

    "COZENS" is the name of the guy I bought the 22lr salvage from.

    I use a Corbin Silver Press with home made dies.

    The barrel is a Pardini HP with a 0.3135" groove diameter.

    I lube the bullets lightly with Lee Liquid Alox. After firing 100 rounds, the barrel is remarkably clean with only the usual Lead/Carbon fouling in the leade.

    Cheers,

    Dave

  2. #2
    Boolit Master


    Nueces's Avatar
    Join Date
    Dec 2006
    Location
    Texas Hill Country
    Posts
    1,724
    Howdy, Dave. First class scholarship there. I know I'm not alone in craving details of your die making process.

  3. #3
    Boolit Bub
    Join Date
    Oct 2010
    Posts
    32
    Greetings,

    Making the die bodies is simple.

    Knurl the OD, turn and thread the die to fit the press, drill and bore the bullet hole.

    If you want to bleed metal off, you need to drill a small weep hole in the side. I used 1/32".

    Heat treat, hone and polish.

    Punches are turned on the lathe with the profile desired. Heat treat and the punch diameters ground to size.

    Visit the Corbin website. He has a lot of great illustrations of the swaging process.

    Cheers,

    Dave

  4. #4
    Boolit Master mtnman31's Avatar
    Join Date
    May 2007
    Location
    Knoxville, TN until I get back to Montana.
    Posts
    742
    Nice, can you show some photos and provide more details? I've got a Hammerli 280 I need to feed. There aren't many molds available for 32 WC bullets.

  5. #5
    Boolit Bub
    Join Date
    Oct 2010
    Posts
    32
    Greetings,

    Accurate Molds has several choices.

    http://www.accuratemolds.com/

    For the 280, you need a mould that finish sizes to 0.314".

    Larry Blackmon sells swage press kits.

    http://www.bulletswagingsupply.com/

    Order a Core Seating die, no holes, and "bump" the Speer 98 HBWC up to 0.314".

    Cheers,

    Dave

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check