StainLess Steel MediaMidSouth Shooters SupplyGraf & SonsADvertise here
Titan ReloadingLee PrecisionRotoMetals2Inline Fabrication

Results 1 to 7 of 7

Thread: Enamel coated pot?

  1. #1
    Boolit Master
    mdi's Avatar
    Join Date
    Jun 2008
    Location
    So. Orygun
    Posts
    5,279

    Enamel coated pot?

    I was rummaging around my shop and ran across an old enamel coated (blue w/design) 2 qt. pot. I thought it might be OK for melting/smelting but not casting as I have an electric pot for that. With a propane camp stove melting 20-30 lbs of lead have any effect on the enamel? I have a home made steel "pot", that holds about 20 lbs but it's clumsy to use.

    BTW; I started casting with a stainless steel pot on a Coleman stove and that worked OK (temp. control was tough) but I was wondering about an enamel coated pot for alloying/melting scrap lead...
    My Anchor is holding fast!

  2. #2
    Boolit Bub
    Join Date
    Nov 2013
    Location
    Mississippi, USA
    Posts
    21
    Enamel coating will start popping off an that high of temp. Try it and you will see.

  3. #3
    Moderator

    ShooterAZ's Avatar
    Join Date
    Jan 2012
    Location
    Flagstaff, AZ
    Posts
    3,747
    I tried it with an enamel coated dutch oven that I bought at a yard sale. It did start coming off right away so I stopped using it.

  4. #4
    Boolit Bub
    Join Date
    Nov 2013
    Location
    Mississippi, USA
    Posts
    21
    Enamel cookware shows to have a max temp of 350 degrees.

  5. #5
    Boolit Master
    bangerjim's Avatar
    Join Date
    Apr 2013
    Location
    out of here, wandering somewhere in the SW.
    Posts
    8,689
    NO........NO.......NO!!!!!!!!

    Enamel ware cannot withstand the re-melting temps we use.

    “Forget-about-it”!

    Just buy a good CI dutch oven and things right and safe.

    Bangerjim

  6. #6
    Boolit Master
    mdi's Avatar
    Join Date
    Jun 2008
    Location
    So. Orygun
    Posts
    5,279
    I wasn't sure, so Ill just use it for lube making...
    My Anchor is holding fast!

  7. #7
    Moderator



    Join Date
    Dec 2005
    Location
    Oregon Coast
    Posts
    3,753
    Quote Originally Posted by mdi View Post
    I wasn't sure, so Ill just use it for lube making...
    Good plan............
    After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check