Here are some surplus to my needs molds that I am ready to part with. I believe that I have them priced fairly. However, if I am out of reality on price Just let me know. They are all great molds and cast without issue.
Please post here on this add if you "will take it" and follow up with PM for payment and shipping details.
Thanks guys! PRICES REDUCED 7-10-18
.
.
.
Attachment 223447
Accurate Molds 43-280F 280grs flat nose double cavity mold.
Here is the link to Tom's sketch on his site.
http://www.accuratemolds.com/bullet_...=43-280F-D.png
$60 Delivered. SOLD TO FLAILGUY
.
.
.
Attachment 223448
Attachment 223449
RCBS 45-201 SWC 200 grs SWC casts correct diameter; right at .453" from wheel weights metal. Sprue plate was modified when I bought it. casts beautifully round boolits with 98-99 percent keeper rate.
$45 Delivered. SOLD TO BEAGLE333
.
.
.
Attachment 223451
452400 double cavity. Out of production for quite a while now. In great shape.
$60 delivered. SOLD TO BEAGLE333
.
.
.
Attachment 223453
LEE group buy CATSHOOTER 45-283-Kieth 6 cavity. Mold is in great shape and boolits fall from all cavities and makes very good boolits. Would not sell this one buy have an almost identical mold from Miha. So don't need two.
$70 Delivered. SOLD TO DJONES
.
.
.
Attachment 223457
NOE 30 caliber paper patch. New never used.
http://noebulletmolds.com/NV/images/...GC)_Sketch.Jpg
$70 Delivered.
.
.
.
Attachment 223459
Lyman 457658 plain base 480 grs spire point boolit for long range target work.
Mold has been marked with punch for indexing when loading and shooting. Does not affect cast or function of boolit.
$45 Delivered. SOLD TO ECHD
.
.
.
Attachment 223460
Attachment 223461
MP 402-160 casts a 150 ~155 grs hollow point boolit.
Mold has been used not abused. Casts perfectly as does most MP molds. Sprue plate bolt retaining screw was lost and has the correct metric thread screw replaced as shown in pics. original metric hex cap can replace the one I used as original threads have not been tampered with. I had intentions of getting the correct hex cap screw but this one works and I never bothered. Perfect 40 S&W boolit.
$70 Delivered. SOLD TO BESSEMER20
.
.
.
Attachment 223462
NOE 460-315 RF casts a 280grs hollow point boolit from wheel weigh metal. Comes with flat pins to cast 315grs solid as well as cup point pins. Mold used for about 300 boolits. Nothing wrong with this one, makes great boolits, I just have so many 45 caliber rifle molds there are some that close copies that I rarely get around to casting with. Here is a link to this mold with the cup point pin;
http://noebulletmolds.com/NV/images/...av3_sketch.jpg
$75 Delivered. SOLD PENDING FUNDS TO VOPIE