Does anybody know the size of the O ring for RCBS sizer dies?
Thank You
Leadmelter
MI
Does anybody know the size of the O ring for RCBS sizer dies?
Thank You
Leadmelter
MI
Call RCBS. More than likely there will be some in your mailbox in a few days.
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Yep. Ordered mine directly from RCBS. Can't remember if they charged me for them or not. Had them in less than a week.
I bought a bag each of the different sizes on my Lyman sizer. Not sure about the others but the ones on the dies will be the same as RCBS.
Not at home but will post the sizes later today.
From Amazon
211 Buna-N O-Ring, 70A Durometer, Black, 13/16" ID, 1-1/16" OD, 1/8" Width (Pack of 100)
015 Buna-N O-Ring, 70A Durometer, Black, 9/16" ID, 11/16" OD, 1/16" Width (Pack of 100)
021 Buna-N O-Ring, 70A Durometer, Black, 15/16" ID, 1-1/16" OD, 1/16" Width (Pack of 100)
They are about $13/100 Canadian right now. I'm never going to have to worry about o-rings again.
ACE hardware carries a selection of O rings, thats where I got the last ones. I was in the middle of sizing a bunch of boolits when lube started comming out from the top of the die. ACE is just a mile from my house, it was much quicker than waiting for snail mail.
Danco #35768B (11/16 x 9/16 x 1/16 #54) available from Ace Hdwe. works on a Lyman die. If it's available locally it's worth a try on an RCBS die.
RCBS needs O rings, man am I getting old as only Lee Used them before.
I've gotten them from my local NAPA store.
Political correctness is a national suicide pact.
I am a sovereign individual, accountable
only to God and my own conscience.
If you have a company that serves the hydraulics industry, they will probably have shelves full of all outside diameters and thickness of o-rings. Beyond that, they probably will be cheaper than most of the routine auto parts and hardware stores, not that these have a high cost anyway.
I assume they are talking of lubrisizer dies not reloading dies.
I use 014 70a buna o-rings on my rcbs sizing dies.
https://0.r.bat.bing.com/?ld=d3QksS3...sl_8ewhsbhxj_p
The same o-ring also works on the lyman sizing dies.
This is what I have in my file
13/16" ID
1-1/16" OD
1/8" Body Diameter
Mike
Benefactor Member NRA
Life Member Iowa Firearms Coalition
US Army Vet
There are two ways to conquer and enslave a nation.
One is by the sword. The other is by debt.”
John Adams 1826
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |