Lee PrecisionInline FabricationRotoMetals2Graf & Sons
StainLess Steel MediaTitan ReloadingMidSouth Shooters SupplyRepackbox
Wideners
Results 1 to 3 of 3

Thread: New Lyman #457125

  1. #1
    Boolit Mold CeeHoo's Avatar
    Join Date
    Jun 2018
    Location
    Finland
    Posts
    4

    New Lyman #457125

    Here is a new Lyman #457125 500gr mold for .45-70. During initial inspeciton I noticed there was something funny about the alignment. Thought it was caused by a burr right next to one of the alignment pins that might guide the halves off-center. I removed the burr and adjusted pins out a bit to cut all the play but still, to me, the way how the halves come together looks worse than that of my .358" Lyman molds. Is this considered normal? Thanks for any advice.








  2. #2
    Boolit Buddy
    Join Date
    Nov 2012
    Location
    Norway
    Posts
    364
    Send it back! That's what I would do anyway. New moulds should cast round boolits and the halfs should line up!

    Sent fra min SM-G930F via Tapatalk

  3. #3
    Boolit Bub
    aws1963's Avatar
    Join Date
    Apr 2018
    Location
    Northern California
    Posts
    55
    Agree with hunter74. That's not right. Send it back.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check