I use a 18 cavity mold from Lee it works great. The actual size of 00 shot is .33 and I load nine of them in a 2 3/4" shell. I think they are running about 1300 FPS over my Chrony.
I use a 18 cavity mold from Lee it works great. The actual size of 00 shot is .33 and I load nine of them in a 2 3/4" shell. I think they are running about 1300 FPS over my Chrony.
I have a Do-it slingshot pellet mold.
one side casts .31 and the other side casts .38.
Cast hot and fast, snap off the sprue while the lead is still grainy and you can make buckshot fast and easy.
https://www.barlowstackle.com/Do-It-...olds-P330.aspx
When you care enough to send the very best, send an ounce of lead.
Nope. Actually one of the easiest of the molds i own to cast good bullets. Dont pressure fill it. Small cavites make it squirt. I keep the spout about an 1/8 of inch away from sprue. It likes to run a touch hotter for perfect bullets than my 9mm molds. So when i cast with it in tandom with 2 molds i have to go a bit faster to keep it hot.
So far i am.happy with the 25 yard groups. I just got some shot buffer to try and tighten it up and maybe get a blue dot load. Sent from my SM-G925T using Tapatalk
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
Grafs offers low flat rate shipping cost regardless of order size.
NRA Life
NMLRA Life
F&AM
Recurring theme with recurring good results...
Reference a January Thread post:
http://castboolits.gunloads.com/show...85#post4262685
Lee multi cavity 00 buckshot mold, with little attention given the nibs.
Salvaging old Marlins is not a pasttime...it's a passion
I typical do not recommend Lee molds, but the 00 buckshot is cheap and it works.
Attachment 223481
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |