ADvertise hereInline FabricationMidSouth Shooters SupplyRotoMetals2
Titan ReloadingLee PrecisionStainLess Steel MediaGraf & Sons

Page 2 of 2 FirstFirst 12
Results 21 to 36 of 36

Thread: Paper patch bullets and silhouettes.

  1. #21
    Boolit Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    8,635
    A lot have a water bottle beside them and take drink every few shots to help keep moisture up. Another thing this may help with is one of the first things affected by dehydration is eye sight a swig every few shots may keep vision sharper also

  2. #22
    Boolit Buddy
    Join Date
    Oct 2015
    Posts
    56
    “...keep vision sharper also“. Good breathing technique too.
    Richard

  3. #23
    Boolit Buddy
    Join Date
    Oct 2015
    Posts
    56
    Randy, Permit are the most elusive, a good 10 wgt works well. Iíd better get back on track.
    Richard

  4. #24
    So for idiots like me what exactly is a "bore critter" ? Thanks !

  5. #25
    Boolit Master
    Join Date
    Jun 2008
    Posts
    1,256
    Road_Clam,
    They are some form of an integrated bore wiping tool. Trade names like Texas Bore Pigs, Bore Weasels, Bore Gophers, Bore Wipes (not very original there, BACO), and others have been created by people that get this job done. All of them are variations on the Fisher Brush system from the late 1800s.

    Most of the incorporate some sort of scrubbing ability that carries wiping fluid (water or an black elixir) and something that acts as a squeegee on the back end to remove most/all of the fluid and fouling.

    This is one of recent reinventions, the Texas Bore Pig


    And here is a Bore Gopher - my own design


    The phylogenetics of these critters is a little confused, but we don't worry too much about that.

  6. #26
    Boolit Master Don McDowell's Avatar
    Join Date
    Jan 2008
    Location
    Hell Gap Wy
    Posts
    5,103
    Brent what do you use for those washers
    GUSA #6
    People will forget what you said...
    People will forget what you did...
    But People will NEVER forget how you made them feel

    Want to join in adult conversation about shooting the old ways without the hysterics associated with other places?http://historicshooting.com/mybb/index.php

  7. #27
    Boolit Master
    Join Date
    Jun 2008
    Posts
    1,256
    They are 1/2" OD x 3/16" ID x 1/16" neoprene from Ace Hardware. I add the source because I have bought the same washers from a machine supply shop for MUCH less money but they lasted less than one season. Though they were cheaper, the Ace Hardware versions have outlasted them by a couple of years.

    A friend sent me some smaller ones for a .40 cal. They were from WalMart of all places but the rubber looks real good, and they have nice sharp edges that should make good squeegees. Also there are website suppliers (names I do not know) that specialize in various forms of rubber washers for different purposes and materials. Some of them might be much better than what I have, but what I have works pretty well, so I haven't really explored.

  8. #28
    Boolit Master Don McDowell's Avatar
    Join Date
    Jan 2008
    Location
    Hell Gap Wy
    Posts
    5,103
    Thanks for the info, might try to work some up, I like that brush in the middle. Tried t make some a while back but the stuff I used for washers didn’t work wort a hoot
    GUSA #6
    People will forget what you said...
    People will forget what you did...
    But People will NEVER forget how you made them feel

    Want to join in adult conversation about shooting the old ways without the hysterics associated with other places?http://historicshooting.com/mybb/index.php

  9. #29
    Boolit Buddy
    Join Date
    Oct 2015
    Posts
    56
    I bought some VFG bore critters from BACo (man, do they get stuff to you quick) below is a quote regarding flexible cleaning rods that was on the BACO site regarding the VFG crittersI see a lot of guys using these flexible rods. In Brent’s video of using critters in the prone position, I don’t think he was using a bore guide of any sort, such as a opened cartridge case...

    “3.Allows the use of a rigid cleaning rod in some rifle so you can quit prematurely wearing out your barrel when using a flexible cleaning rod.”
    Regards, Richard

  10. #30
    Boolit Master
    Join Date
    Jun 2008
    Posts
    1,256
    If you are going to make up some bore critters with brushes, I recommend these
    https://www.brownells.com/gun-cleani...prod40083.aspx

    They have bronze cores and won't rust out like steel cores do.

    Richard, no, I don't use a bore guide. I don't know anyone who does on the firing line. I don't think a drilled firing case would suffice anyway, if using a delrin rod.

  11. #31
    Boolit Man
    Join Date
    Feb 2011
    Location
    Queensland Australia
    Posts
    77
    Mine are like Brents but I leave out the rubber washer wiper. The front felt and brush are wet in the ammo box of water, and I leave the back felt dry. Push through with a dry patch concentrating on the chamber. Bit more work but still experimenting.
    . by [url=https://www.flickr.com/

  12. #32
    Boolit Buddy
    Join Date
    Oct 2015
    Posts
    56
    That looks like it will work Keith, and a lot less $$$$$ than I paid.
    Regards, Richard
    Edit...are you trimming the hair off the brush and pushing the felt of the twisted part?

  13. #33
    Boolit Man
    Join Date
    Feb 2011
    Location
    Queensland Australia
    Posts
    77
    Quote Originally Posted by flatsguide View Post
    That looks like it will work Keith, and a lot less $$$$$ than I paid.
    Regards, Richard
    Edit...are you trimming the hair off the brush and pushing the felt of the twisted part?
    Yes, I just rotate the end against the bench grinder to remove a few bristles.
    These are a bit more work than Brents as he just gives his a rinse and a shake and can reuse. Mine, I have to undo the nut and replace the felt with a dry one each time but I bought heaps of them so its OK. I wash and dry them later.
    I couldnt find decent washers to use that wiped well and had the right size hole. If I could I would give Brents a go again for simplicity.

  14. #34
    Boolit Buddy
    Join Date
    Oct 2015
    Posts
    56
    Thanks for that info Keith.
    Regards, Richard

  15. #35
    Boolit Master Lead pot's Avatar
    Join Date
    Jan 2006
    Posts
    2,613
    I haven't used any of these bore critters yet but I might try them. Being a Plumber by trade that has used a lot of bib washers and O-rings of all kind I think a leather bib washer might be more effective then a neoprene for the trailing dry wiper they would work more like a squeegee
    and they can be made from old leather belts by just punching them out with a press mounted wad cutter.

  16. #36
    Boolit Master
    Join Date
    Apr 2013
    Posts
    630
    [QUOTE=Keith;4398847]Mine are like Brents but I leave out the rubber washer wiper. The front felt and brush are wet in the ammo box of water, and I leave the back felt dry. Push through with a dry patch concentrating on the chamber. Bit more work but still experimenting.
    . by [url=https://www.flickr.com/[/QUOTE] What your showing I"ve been using for 3-4 months ,made 50 for $70.00 and they work great ,followed by a dry patch they speed up wiping and leaving a consistent a bore condition !/Ed

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check