Hi everyone here Is my dilemma.
Basically I have some .223 bullets that I have powder coated they are 55gr RCBS mold. I have a somewhat thick coating on the bullet I have developed to help cut back on leading in my suppressor. The problem I’m having is the coating is somewhat thick and the bullets are kind of taking a lot of force to get through the lee sizing die. It’s basically causing the projectile to elongate by about .020 In over all length. They seem to be shooting ok or at least good enough for plinking which is all I’m really doing but I still like my bullets to be nice and uniform. If anyone has any advice I would appreciate it.