I use 30 cal ammo boxes to carry spent bullets. About 40 lb each. 50 lb if you stack (bigots) ingots in them.
I use 30 cal ammo boxes to carry spent bullets. About 40 lb each. 50 lb if you stack (bigots) ingots in them.
Last edited by jdfoxinc; 06-15-2018 at 07:17 PM. Reason: #/=/^%&<auto auto correct
QUIS CUSTODIET IPSOS CUSTODES?
I wonder if a simple sifter could be made from a 5 gallon bucket ( cut slits and line with the desired mesh) on a stand with a couple bushings on it with a handle. simply put the load in and turn to agitate. At the hand turned speeds wood bushing greased well would last a long time. This would save the hand shaking or lifting. Im thinking along the lines of a mortor mixer or cement mixer. A flange bolted to the bucket and a length of pipe a hand wheel or simple handle to turn or rock back and forth to agitate.
Or like a old fanning mill use 4 straps and hang the screen from them on the frame then a handle to agitate.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |