NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Do the HP molds come with flat pins for a solid?
Sent from my iPhone using Tapatalk
There are three different styles/sizes of hollow point pins included in this design.
The pins are made in such a way that if you turn any of them 180 degrees, you will get a flat point. The part that sticks out (to create the hollow point inside the cavity) will now be sticking outside of the mold. Most of us slide the mold under the bottom pour pot using a flat plate of some sort, so that the point of the pin doesn't interfere with the sliding.
So, you can make a flat nose, solid point bullet with this mold set.
Each of the drawings in the first post show what the solid nose boolit will weigh.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
OK thanks. Will consider,
-BE
Sent from my iPhone using Tapatalk
Change mine to 4 cavity mold with lube groove, with all pins, plain base, lrn2drv1 at yahoo dot com 98223 Zip Code, DHL Shipping
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Please remove me from the buy. I'm needing a mold soon and a "Quick Buy" 40 cal. thread popped up on here (after I signed up on this one) that suits my needs.
I am #8 on the 6 cavity aluminum solid nose list.
Thanks!
Duke can you change my order to a 4 cavity and remove the DHL shipping (boomsticks Firearms) # 5 on 2 cavity
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I am interested in getting in on one of these, when do you think the orders will be fulfilled?
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Please put me down for one mold + handles
deltamike
1 mold, 4 cavity brass, powder coat style, plain base (hollow point, etc.)
handles
DHL shipping to 77586
bmichael333 AT gmail DOT com
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
ldmcrook:
(1) 4-cav brass PB ;with lube groove and pins with DHL shipping to 84095
Mjcrookston at msn dot com, thanks.
Bump to keep moving. Duke any word on when Mehi thinks this will go?
Duke can you remove the handles from my order I’m #15
Added, thanks.
The answer to all MP-Mold's HP production has to do with the HP inserts. Miha has those made for him, and his minimum order for inserts is 100 inserts. Half of that amt is needed to go from Discussion to Active, and the order closes when we hit 100 inserts.
Yessir. Done.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Ok so if I understand right. For this buy the total pins are 3 @100 each=300 total
Current - 2 cavity has 42, plus 4 cavity has 204 so we are @ 246
so we need 13.5 more 4 cavity moulds.
Sorry for being so dense.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |