Clarification, although most of you didn't notice the apparent error.
There is NO gas check for a .40 caliber bullet.
The original design for this bullet (images, first post) shows a plain base, and two options, lube grooves and no lube grooves. Solid nose and hollow point. That's it. Somehow, along the way, the concept of a gas check version for this came up, and some of you asked for a gas checked mold design. To repeat for the sake of clarity, there is no 40 caliber gas check. Miha just questioned this, and I went through the orders, and changed them all to plain base. There is no gas check version. I trust that this down not create any issues, since, even if Miha made them with gas check feature, you still can't find gas checks to fit on them, they don't really exist. You CAN buy a plain base style gas check for 40 caliber:
https://www.sagesoutdoors.com/10-mm-...se-gas-checks/
That would be my suggestion for those of you seeking a gas check for these bullets.
(Not to confuse anyone, but 9mm plain base gas checks are 35 caliber rifle gas checks. They snap right on 9mm bullets, .355")
The gas check discussion doe not effect the solid or hollow point nose, nor does it effect the lube grooves or no lube grooves.
Your orders, as listed in Post #1, reflect your wishes for lube grooves and hollow points vs no lube grooves and solid nose.
This will be an amazing 40 caliber 165 grain mold. Those who get them will be delighted. Those who miss out will be begging for any leftovers.
This Buy is still active, we are still taking orders. It's on Miha's "radar" and he'll be dealing with them soon I suspect.