Titan ReloadingInline FabricationRotoMetals2Repackbox
Lee PrecisionWidenersGraf & SonsMidSouth Shooters Supply

Results 1 to 4 of 4

Thread: Lead weights from stockbridge dampers on power lines

  1. #1
    Boolit Bub
    Join Date
    Sep 2015
    SE Missouri

    Lead weights from stockbridge dampers on power lines

    Anyone ever used any of this before? Any thoughts on it?

  2. #2
    Boolit Master
    Join Date
    Jan 2010
    Tom, VA
    They certainly look like lead. If you have access to some, my advice is to melt them and try casting. If they cast good bullets, check hardness. Alloy as needed.

  3. #3
    Boolit Master

    Join Date
    Oct 2009
    All of the ones that I installed were zinc or galvanized steel. If you have lead ones thats great. I would put a drop of acid on them or test them against a magnet before going to very much effort.

  4. #4
    Boolit Grand Master

    Lloyd Smale's Avatar
    Join Date
    Mar 2005
    munising Michigan
    yup the ones we used were cast steel with a galvanized coating. I know at one time they did use lead though. But I'm 62. was a lineman most of my life and it was before my time.
    Soldier of God, sixgun junky, Retired electrical lineman. My office was a 100 feet in the air, closer to God the better

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check