WTB-RCE Standard Shellholder Adapter for Wallnut Hill Swage Press

[Meatpuppet]

Unfortunately Richard Corbin is no longer stocking them.

[lup]

The shell holder adapter for either the hornady press or the max a4 press will work fine.

[Meatpuppet]

Holy smokes!!! Thanks. Apparently my Google-Fu is not that good.

[shooterg]

I must have bad Google skills too - can't find it. Y'all please post a link to one or the other.

[lup]

https://r.tapatalk.com/shareLink?url...8&share_type=t

This is the best one made by a member here at cast bullets. You can also disassemble a hornady lock and load 50 bmg bushing.
Hornady doesn't have a direct link to that on their website unfortunately.

[IllinoisCoyoteHunter]

The Big Max adapter will work with the addition of a washer so the adapter can shoulder properly when screwed into the Walnut Hill. The other option would be to machine off the diameter between the end of the threads and the outside diameter of the adapter. This shortens the adapter and thus lengthens the useable stroke of the press. This could be good or bad depending on the length of dies you plan on using. The washer, IMHO, is the best route.