Mihec 358-180 Larsen PB/ GC 180 gr .358 or .360 -Solid Only
This one will remain in Group Buy Discussions until we hit 5 commitments. We need 10 to put it into last call.
This is a Cast Boolits original designed by Cast Boolits member and legend Mr. Glen Larsen, its a VERY proven design. Miha already has the cherry for this one, just need buyers! This is the most accurate 38 caliber boolit that I shoot in 357 Magnum. My only true MOA load. Boolit has the perfect amount of bore riding nose and the ability to get the boolit into the lands is easy because the full diameter extends so far in front of the crimp groove. Just seat it a little deeper and crimp.
Awesome Article about this Boolit: (I do not agree with the Lil Gun Max Load(Sticky extraction))(work up with H110 and find magic on the upper end of the charge range)
http://www.castbullet.com/shooting/rossi-s3.htm
Weights are lubed and gas checked, ready to load. 185 gr. solid
Would be available in 6-cav Solid Brass, or 8-cav Solid Aluminum. (Choose GC or PB)
It needs 5 buyers to commit to this thread before it goes active, and 10 buyers gets Miha cutting molds
Features:
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)
Weights, ready to load:
Solid 185 gr PB 180 gr GC
Diameters:
.358 or .360
Prices are with shipping included, below.
- 6 Cavity solid Brass 95 Euro's (80,75 Euros with discount)
- 8 Cavity solid Aluminum 95 Euro's (80,75 Euros with discount)
GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE
Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.
Please list your info in the following way: (user name) (disguised email) (type of mold) (Gas check or Plain base) (zip code)
6 cavity Solid, Brass mold with (GC or PB)
1) iraswillvols at gmail dot com-- .358 6 cav- Brass- PB- Lube Grooves
2)RunderscoreKARKatATTdotNET- .358 6 cav- Brass- PB- Lube Grooves
3) j underscore bownes at yahoo dot com- .358 6 cav- Brass- PB- Lube Grooves (HONCHO)
4) keith(dot)kohlruss(at)gmail(dot)com- .358 6 cav- Brass- PB- NO Lube Grooves
5) scotzoiler (at)aol (dot) com- .358 6 cav- Brass- PB- Lube Grooves-ZIP 98391
6)tomAT bluebird nursery DOT com -.358 6 cav Brass GC -Lube Grooves-68629
7)scotzoiler (AT) aol (DOT) com-.358 6 cav Brass GC -Lube Grooves
8) Philo187ATyahooDOTcom--.358 6 cav Brass GC -Lube Grooves-
9)j underscore bownes at yahoo dot com- .358 6 cav- Brass- PB- Lube Grooves (HONCHO)
10)
8 cavity Solid, Aluminum mold with (GC or PB)(Lube Grooves or NO LUBE GROOVES)
1)greg AT watchmanstower DOT com- .358 8 cav GC- NO LUBE GROOVES- 65552
2)middle earth sales and service at gmail dot com- .358 8 cav GC- NO LUBE GROOVES
3) bbreloading AT gmail DOT com - .358 8 cav GC- NO LUBE GROOVES- 77388
4) greg AT watchmanstower DOT com- .358 8 cav PB- NO LUBE GROOVES- 65552
5) Chennings a t Gmail dot C0m- .358 8 cav GC Lube Grooves
6)Chennings a t Gmail dot C0m- .358 8 cav PB Lube Grooves
7)shurestrikeman at com cast dot net- .360 8 cav GC Lube Grooves
8)ralphyboy75 at yahoo dot com - .358 8 cav PB Lube Grooves+ SET OF HANDLES
9)scorge30 ((at)) hotmail ((dot)) com- .360 8 cav GC-Lube Grooves Zip is 98271
10)crawford.david.d AT gmail DOT com-- .360 8 cav GC- Lube Grooves - 79414
11)idahobronco at aol Dot com- .360 8 cav GC-Lube Grooves
12)
13)
14)
15)