CLOSED-Mihec-314-140-PB-GC-140gr-311-or-314-(32-6gun-Sledgehammer)-Cramer HP & Solid

[John McCorkle]

I haven't seen any data on anything quite this heavy from 32 mag or 327 fed, but I imagine it will do nicely... especially with the large pin hollow point. Just checked my Lee manual too and nothing over 100 there either. Sorry I don't load for either of those so can't give any war stories of success or failure for them

Sent from my Moto G Play using Tapatalk

[megasupermagnum]

I'm very tempted but I cant find any reloading data. Anyone have any ?

I've got a number of loads I've worked up for a 140 grain and 148 grain bullet in 327 federal. You won't find anything published, but the sledgehammer has been around since I think 2011. There are lots of loads people have tried with it. I've seen some outright crazy numbers with H110. I've ran my 148 grain with up to 11 grains H110. 7.4 grains of Blue dot is my personal choice, gives 1220 fps from my 5" GP100, and was the load I used to shoot a deer this year.

[scorge30]

My old Lee powder measure didn't meter Blue Dot consistently, so I stopped using that powder. Now that I have a Harrell's Precision Schuetzen / Pistol Measure, I am hoping that my days of inconsistent Blue Dot charges are over. I used to love Blue Dot in my .357 Maximum and .44 Magnum.

My .32-20 is a custom MGM 10" bull no-taper barrel for my T/C G2 Contender and likes stiffer charges, usually around some of the lighter .357 Magnum loads.

When I get this mold it will be the heaviest bullet I will have ever shot in that barrel.

I've been shooting cast 123 gr hollow points over a stiff charge of W-231 using small rifle primers. Hollow Point Molds modified the mold for me with a deep, hollow point inset-bar. The NEI #77 six-cavity mold originally cast a gas checked 145 gr flat nose bullet designed for heavier .32 cal rifles. As modified, it casts a 123 gr deep hollow point bullet that fragments easily when cast of pure lead. I also had Hollow Point Mold remove the gas check from three of the cavities giving me the option of casting either gas checked or plain based bullets.

Cast of linotype or WW alloy, the bullets tend to either shear the hollow point section off, or mushroom beautifully. Using 20-1 alloy tends to produce nice mushroomed bullets when recovered from wet Treasure Valley phone books. Haven't been able to recover a bullet other than fragments from a critter, yet.

Casting the bullets with pure lead makes a soft, explosive bullet great for walking my parent's farm in southern Idaho shooting rock chucks. I don't want a bullet bouncing off the rocks sailing into my parent's neighbor's place. Where I shoot rock chucks in eastern Washington (i.e. - the dry side), I have no such worries.

Here is an example of what my mold looks like:
http://www.hollowpointmold.com/inset...turnto=705#705

[Cord]

I'm on the list for a 4 Cav PB NLG HP:
(Cord) denbay58 at twc dot com- .311- 4 Cavity PB HP - NLG (44705)

I want to add a second mold, also .311 but this one to be GC, WITH a lube groove:

(Cord) denbay58 at twc dot com- .311- 4 Cavity GC HP - (44705)

Thanks!
.

[Wheelguns 1961]

I’m in!
(Wheelguns 1961) haw1961 at live dot com
.314-8cavity pb-nlg-19804

[bluejay75]

All fixed up gents...Only a few more to go.

[Dr-Greg]

Please put me down for another, but this time I'm changing the diameter a bit:

greg ((att)) watch mans tower ((dott)) comm-.314-8 cavity GC- NLG-65552

[bluejay75]

Please put me down for another, but this time I'm changing the diameter a bit:

greg ((att)) watch mans tower ((dott)) comm-.314-8 cavity GC- NLG-65552

He cant do .314 GC.

[Dr-Greg]

He cant do .314 GC.

Oh ok, no problem. I'm happy with the 2 I've signed up for so far

[bluejay75]

Oh ok, no problem. I'm happy with the 2 I've signed up for so far

Sir...I was mistaken. This cherry started out as .314 and can be GC. I will confirm. He has to buy a new cherry everytime you ask for a GC NLG Boolit anyway...LOL

[Dr-Greg]

Sir...I was mistaken. This cherry started out as .314 and can be GC. I will confirm. He has to buy a new cherry everytime you ask for a GC NLG Boolit anyway...LOL

Well, in that case you can put me down for what I said in post #67

That would make a total of 3 moulds I'm signed up for for this buy.

Thank you for your help and clarification on this.

[Boolseye]

I’m bowing out for now, may be back before it closes.
-BE

[bluejay75]

All fixed up for now...

[bluejay75]

2 more HP molds puts this one into last call.

[Boomsticks Firearms]

Bluejay can you change my order from .0311” to .0314” l’m #9

[bluejay75]

Done sir.

[emorris]

Any answer if this can be offered in a 2 cavity version? Looking for .311, No lube grove, gas check, hollow point. Saw a post asing ut no answer. If so can you quote a price?

[bluejay75]

Any answer if this can be offered in a 2 cavity version? Looking for .311, No lube grove, gas check, hollow point. Saw a post asing ut no answer. If so can you quote a price?

Post your order. Sorry for the confusion.

[Kawacharles]

Hmmm, its possible this Bullet fits it in the Ruger Blackhawk in .30 Carbine?

Charles

[jmort]

4 cavity HP NLG GC .311 all pins
Please
middle earth sales and service at g mail dot com

I think I was missed