Titan ReloadingReloading EverythingInline FabricationRepackbox
Lee PrecisionWidenersLoad DataRotoMetals2
MidSouth Shooters Supply
Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: 357 carbine vs pistol velocities(reduced charges)

  1. #1
    Boolit Bub
    Join Date
    May 2018
    Posts
    55

    357 carbine vs pistol velocities(reduced charges)

    Hi Folk's, nice forum. Just dropped in to see if any lever experts can help. My question is wondering what velocity increase might be going from 10" pistol(hodgons test data) and a 24" barrel 357 carbine(rossi 92) with 158grain cast bullets. The proviso is reduced low pressure charges. A 400fps+ increase is normal for heavy powder loads but I am doubting you would get the same for small powder charges as below...200fps?

    Hodgons 10" cast bullet data.

    Titegroup 4.5grains 1,028fps 5.0 for 1108fps
    700-X 3.4grains 867fps 4.9 for 1137fps.

    Thanks for any guesses?

  2. #2
    Boolit Grand Master Tatume's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    5,574
    Hi Stef,

    Welcome to the forum.

    Hodgdon lists data for a 10" pistol-length barrel and an 18.5" carbine length barrel. Your Titegroup excerpt matches up to the 158 gr LWSC bullet data, which are also listed in the "Rifle" section with the same loads. The velocities are 1157 and 1220 fps, respectively.

    The 700-X loads are not duplicated in the rifle section, but you can extrapolate.

  3. #3
    Boolit Master


    Walks's Avatar
    Join Date
    Jun 2016
    Location
    SoCal
    Posts
    3,028
    When you use light powder charges in a small case. That small charge is completely consumed in a RIFLE bbl. So sometimes you get slower velocities out of a long barreled pistol caliber rifle.
    I actually get lower velocity out of a 24" bbl rifle than a 19" carbine or 5.5" bbl revolver. That 5grs of TITEGROUP in a .44Mag in consumed in a 24" rifle before the bullet exits the bbl. Use a hotter load such as a full charge of W296 or 4227 in a rifle to reach the rifles full potential. Save the lighter charges for revolvers.
    I HATE auto-correct

    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

    SASS #375 Life

  4. #4
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    I use ordinary standard pressure .38 Special loads in rifles to reduce noise without having to resort to a suppressor so that I can shoot small game and varmints on my property without upsetting the neighbors. Ordinary .38 Special target wadcutter loads get about 870-900 fps from a 25" rifle barrel. Standard pressure 158-grain LRN .38 Special gets about 1000-1080 fps.

    In a light, open-sighted rifle you can expect groups around 2" to 2-1/2" for ten shots at 50 yards.

    Attachment 220818Attachment 220819Attachment 220820
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  5. #5
    Boolit Grand Master Tatume's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    5,574
    That is a very nice looking rifle! Although your photo title indicates Carlini, it sure looks like a Purdey side lever rifle to me.

  6. #6
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    Quote Originally Posted by Tatume View Post
    That is a very nice looking rifle! Although your photo title indicates Carlini, it sure looks like a Purdey side lever rifle to me.
    Carlini in the photo title is the Italian gunsmith in Turin who did the restoration.

    Here is the Cogswell & Harrison London barrel marking and a couple more pics:

    Attachment 220823Attachment 220824Attachment 220825
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  7. #7
    Boolit Grand Master Tatume's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    5,574
    You must get an awful lot of enjoyment out of that rifle.

  8. #8
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    Quote Originally Posted by Tatume View Post
    You must get an awful lot of enjoyment out of that rifle.
    Yes, and its .32 S&W Long cousin also:

    Attachment 220829Attachment 220830
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  9. #9
    Boolit Grand Master Tatume's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    5,574
    Gulp!

  10. #10
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    Quote Originally Posted by Tatume View Post
    Gulp!
    Less money than a Harley, a bass boat, an RV or wife!
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  11. #11
    Boolit Master


    fecmech's Avatar
    Join Date
    Mar 2005
    Location
    Buffalo NY area
    Posts
    4,030
    With slow powders such as 2400,4227,296, Blue Dot, etc. a rifle will give you 350-400 fps over a handgun. Fast powders such as Bullseye, Red Dot 700x ,Unique will add approx 200 fps to handgun velocities in the .38/.357.
    "Masculine republics give way to feminine democracies, and feminine democracies give way to tyrannies.” Aristotle

  12. #12
    Boolit Bub cb4017's Avatar
    Join Date
    Mar 2009
    Location
    Northern Nevada
    Posts
    35
    I can share these results. I loaded some light .357 mag rounds using a 158 gr cast FP bullets in front of 4 gr of WST. Velocity out of a 4" Ruger SS was 793 fps. Out of a 20" Henry velocity was 974 fps.

    I also shot some loads of 158 gr SWC in front of 7 gr of SR 7625. Ruger velocity was 1136 fps. Henry velocity was 1331 fps.
    Cliff
    FPD, NRA Lifer, USN retired

  13. #13
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    Quote Originally Posted by cb4017 View Post
    I can share these results. I loaded some light .357 mag rounds using a 158 gr cast FP bullets in front of 4 gr of WST. Velocity out of a 4" Ruger SS was 793 fps. Out of a 20" Henry velocity was 974 fps.

    I also shot some loads of 158 gr SWC in front of 7 gr of SR 7625. Ruger velocity was 1136 fps. Henry velocity was 1331 fps.
    Good data points, thanks for posting!
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  14. #14
    Boolit Master

    Join Date
    May 2006
    Location
    Ala.
    Posts
    1,190
    I shoot 158 Lee rnfp in 6" SW 686 over 8gr AA#5 for 1100fps, out of 20" bbl 1873, get 1375ish.

  15. #15
    Boolit Master Speedo66's Avatar
    Join Date
    Apr 2009
    Posts
    622
    At the far end of the spectrum, Buffalo Bore is claiming for their .357 158g JHP cartridges 1485fps from a 4" revolver, and 2153fps from an 18 1/2" lever action. That's an increase of over 650fps.

  16. #16
    Boolit Buddy
    Join Date
    Oct 2014
    Location
    Minnesota frozen tundra
    Posts
    245
    Since I bought my first chronograph (reminds me of how old I am..it was an Oehler model 12, which gave you a binary readout of the elapsed time and a chart that gave you a conversion to fps, purchased forty some years ago) I have learned that my firearms do not read nor follow the same books and charts that I do. I have also learned that ammo, especially on the lower velocity end of the spectrum, can vary greatly from firearm to firearm. I assume that this is in large part caused by drag of the bore, which is minimized in higher velocity loadings.

    That being said, here are a few examples of my personal data. The following are 38 special loadings, based on 5 shot averages.
    2.8 gr of Red Dot and 115 gr cast bullet: Ruger 5 1/2", 669 fps, Uberti 73, 20", 803 fps
    5.0 gr Unique and 125 gr cast bullet: Ruger 5 1/2", 950fps, Uberti 73, 20" 1122fps
    3.6 gr Trail Boss and 93 gr cast bullet. Ruger 5 1/2", 870 fps, Ubert Lightning, 24", I think, but might have been 20" 776fps. (I was very surprized by this, so fired another 5 rounds to confirm, and got same results) I planned to slug the barrel of this rifle and see if there was anything strange, but got extracted by something bright and shiny, never shot this rifle again, and never got it done)



    This is 357 example, with a little hotter loading
    11.0 gr H4227 and 125 gr cast bullet: Ruger 6 1/2", 1031 fps, Winchester 92, 24" 1355fps

    In doing some playing with 38 vs 357, fillers and different loadings, I found some interesting things. Here is an example. 38 special case, 2.8 Red Dot and 125 gr cast bullet. The thing that varied was the depth of the bullet seating. (I kind of stumbled into doing this because I bought a pair of Ruger Single Six's that had been converted to 38. They would chamber a 38 special case, but because of the cylinder length, the cases needed to be loaded very short.)

    In the "short" loading, I seated the bullet so that the nose was even with the end of the case. In the "long" loading, the bullet was seated longer than normal, beyond the crimping grove, so that the overall case length approximated the OAL of a 357.
    "short" loading: Ruger 5 1/2" 707 fps, Uberti 73, 20" 901 fps
    "long" loading: Ruger 5 1/2" 528 fps, Uberti 73, 20" 789 fps

    I have also found, in comparing the same loading in two different Rugers, with serial numbers within 100 of each other, that there was an average velocity difference between the two of 50 fps, with the same load.

    The whole point of all this, is that while we all need loading data to give us norms, averages and starting points, the actual results can vary greatly when actually loaded and shot. With the low costs that chronos have dropped to, I think it is a tool that every serious handloader should consider.

    Jackpine

  17. #17
    Boolit Master

    jcren's Avatar
    Join Date
    Nov 2014
    Location
    South, Central Ok
    Posts
    2,173
    Not a 357, but in my 45acp I see the greatest jump using slower powders. Cfe pistol is one of the most impressive and it burns well in moderate loads as well.
    "In God we trust, in all others, check the manual!"

  18. #18
    Boolit Bub
    Join Date
    Jan 2008
    Location
    Central Arkansas
    Posts
    66
    I recently bought a Marlin .357 and I'm starting to load for it. My first load was in magnum cases using 4.5 grains of W231 under a RCBS 38 150 SWC which casts at 155 grains. Out of my revolvers it clocks at +/- 850 FPS. From the Marlin I got 1060 FPS. I think I'll try a 4.0 grain load next to get closer to 900 FPS.
    All that is neccessary for evil to triumph is that good men do nothing.

    Edmund Burke

  19. #19
    Boolit Bub
    Join Date
    May 2018
    Posts
    55
    Thanks for all the replies. Very basic trend of the above.

    2.8-4.5 grain powder loads. Around 120-180fps increase in a rifle
    5-8 grain powder loads. 200-270fps increase in a rifle.

  20. #20
    Boolit Grand Master

    Join Date
    Mar 2005
    Location
    Bloomfield, Nebraska
    Posts
    6,073
    Water"s "Pet Loads" had data and two chapters on 357 in barrels from 2" to 20".

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check