Just looking for diameter and length.
Dia about .250 length about .500
That will get you started
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Here is one approach I took a while ago. I bought a lee .225 bator 6 cavity mold which turns out a 55 grain boolit. Then later I converted it to an 11 cavity with my drill press, a .25 drill and counter sink. The mold is less than $40.
The boolit is .52" @ 55gr before put into the core forming die. Just resizing and bleeding off a little lead gives you a .247 dia (or what diameter your die produces, for .30 cal slugs) 50 grain slug @ .50" more or less.
Bill
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |