Graf & SonsADvertise hereInline FabricationStainLess Steel Media
MidSouth Shooters SupplyLee PrecisionRotoMetals2Titan Reloading

Results 1 to 3 of 3

Thread: Interesting find

  1. #1
    Boolit Master
    Join Date
    Feb 2017
    Location
    w michigan
    Posts
    209

    Interesting find

    Having successfully developed loads for a couple of previous glocks, and a compact S&W, when I got my 5" SW I figured... no problem.

    Well, multiple alloys, sizes, oal, crimps (no crimp, fcd etc) and powders later, I was still getting leading (about 1/3 barrel).
    (for info sake. Size is always after PC)

    I am not sure why, or for what reason, I double coated a batch of COWW.

    Shot them. 99% of leading was gone

    Tried same with range scrap.

    Very little leading again. Came out with cleaning brush.

    I guess I am not going to screw with success. I may try ESPC, as maybe this exposed problems with my dry tumble method... But an interesting find none the less. Can't say why, but it seems to help. Just takes an extra few minutes at the toaster oven on a casting day

  2. #2
    Boolit Master Grmps's Avatar
    Join Date
    Jul 2016
    Posts
    2,088
    I assume the PC passed the smash test and I also assume you slugged / pound casted the barrel and are sizing at least 1 thou over the size (somtimes you need to go 3 thou over depending on alloy and how hard your pushing it..
    What caliber is the S&W?

  3. #3
    Boolit Master
    Join Date
    Feb 2017
    Location
    w michigan
    Posts
    209
    It's been a difficult M&P 9mm. yes, slug and smash test and whatnot (.3555, sizing .357 and .358 through testing). All the steps I have taken for previous 9mm and other M&Ps. The .358 double coated shot like butter (for me). scored 100 at 15y on B8 which is a pretty good load/shoot for my hands.

    I think I was just doing a crappy job with Smoke's powder... am happy it is working finally! 3 gun this weekend

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check