MidSouth Shooters SupplyADvertise hereRotoMetals2StainLess Steel Media
Lee PrecisionInline FabricationTitan ReloadingGraf & Sons

Results 1 to 10 of 10

Thread: Material source for making checks?

  1. #1
    Boolit Master brewer12345's Avatar
    Join Date
    Sep 2017
    Location
    Denver Metro Area
    Posts
    451

    Material source for making checks?

    I recently got my 30 and 35 caliber checkmakers from Pat and would like to try them out. What material does everyone use? These would mostly be for 30-06 and 35 Rem boolits. It would be nice to find an economical source material that makes high quality checks. I went to the first page that came up with I googled and it seemed like the copper sheet would cost as much as factory checks.
    "I have learned from experience that a modicum of snuff can be most efficacious." - the Baron von Munchausen

  2. #2
    Boolit Master
    Dryball's Avatar
    Join Date
    Apr 2012
    Location
    New York
    Posts
    426
    I use pop or beer cans, they are really cheap
    Domari Nolo

  3. #3
    Aluminum flashing for roof, make sure you get the right thickness for your checs. Amerimax is the brand I use.

  4. #4
    Boolit Master brewer12345's Avatar
    Join Date
    Sep 2017
    Location
    Denver Metro Area
    Posts
    451
    So is there an accepted way to tell what thickness I need? Pats site suggests the .014 amerimax flashing. Is that a universal choice or does it vary by mold or caliber?
    "I have learned from experience that a modicum of snuff can be most efficacious." - the Baron von Munchausen

  5. #5
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    1,285
    I make up checks in a variety of sizes from .010 to .016. One size does not fit all. For my use, .012 seems the best compromise. When you cut flashing for the checks it's a fine line between too large and to small. Contact the folks at Coil & Foil for rolls of aluminum is by far the easiest. Good people and service is top notch. Gp

  6. #6
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Location
    Beautiful Idaho
    Posts
    1,285
    I will add that if you are stuck on using copper and don't want to use aluminum other than being self-sufficient there's not a great savings over commercial checks. Vendors here at Boolits sell checks at a very reasonable price. Gp

  7. #7
    Boolit Master
    Tom W.'s Avatar
    Join Date
    Mar 2005
    Location
    Phenix City, Alabama
    Posts
    2,632
    I've found that a piece of soda can folded over and hammered flat works as well as the thicker aluminum flashing, at least for me. I have a Free Chex II in .45 cal, but I also found that I can use the check for my .44 cal. revolver boolits. YMMV....
    Tom
    μολὼν λαβέ

  8. #8
    lyon shim stock
    sold in various thickness and materials, ie copper, dead soft bronze, alum etc, comes in 50 ft by 6" rolls if memory serves correct.

  9. #9
    Boolit Master



    MUSTANG's Avatar
    Join Date
    Jan 2012
    Location
    Moapa, Nevada or Kalispell, Montana
    Posts
    1,191
    I use Amerimax Aluminum Flashing (ACE Hardware Stores) for .30, .32, and .357. For my 50BMG cast boolits, I bought several rolls of aluminum strip from Coil and Foil - Great Product. For my .224 cast products - Coil and Foil again.
    Last edited by MUSTANG; 07-12-2018 at 04:03 PM.
    Mustang

    "In the beginning... the patriot is a scarce man, and brave and hated and scorned. When his cause succeeds, the timid join him, for then it costs nothing to be a patriot." - Mark Twain.

  10. #10
    Boolit Master Sagebrush7's Avatar
    Join Date
    Aug 2010
    Location
    Jacksonville, Al
    Posts
    444
    We have a large roll of .010 aluminum that makes great checks. Not needed in our business anymore. Will sell it by the foot cheap. Send us a PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check