Graf & SonsRotoMetals2ADvertise hereInline Fabrication
StainLess Steel MediaTitan ReloadingMidSouth Shooters SupplyLee Precision

Results 1 to 2 of 2

Thread: Problem Solved, Accuracy is Back!

  1. #1
    Boolit Master
    Join Date
    May 2010
    Location
    Chula Vista, CA
    Posts
    903

    Problem Solved, Accuracy is Back!

    If you read my post about loss of accuracy in my 45 caliber under hammer, today I got it solved. It appears I did not write and later read the dope from my dope book and was using 80 grains of FFG. The was too small a load and closer examination of my notes I might have written 90 grains. So I tried 90 grains today and at 100 yards......my 10 shots were in 2x 5 shot groups exactly where I aimed. At the end after the barrel got warm I tried a couple of 80 grain loads and the bullets hit right at the bottom of the backer! I am not sure why the load has to be so high for this rifle compared to my other slug guns but.......
    John

  2. #2
    Boolit Master
    Kuato's Avatar
    Join Date
    Apr 2008
    Location
    Miami, Florida
    Posts
    276
    Live and learn.. Glad you're back on target..Some guns need a bit more oomph to get the pill there. Nature of the beast.
    SI VIS PACEM, PARA BELLUM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check