I知 currently using 408 jacketed drawn to 338 for my needs, but they are very long.
I知 looking for a 338 Jacket to make a 300gr in a VLD shape with boat tail.
I知 not having much luck finding a commercial jacket.
What are you guys using?
I知 currently using 408 jacketed drawn to 338 for my needs, but they are very long.
I知 looking for a 338 Jacket to make a 300gr in a VLD shape with boat tail.
I知 not having much luck finding a commercial jacket.
What are you guys using?
What length and wall thickness do you need? Are you using enough jackets to justify making them from tubing? I would think .375 tubing could be drawn into .338 jackets easily enough, especially if you're already drawing down .408 jackets. I'd think you'd just need the .375 tubing jacket die and appropriate punches.
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
I have a long 375 jacket (1.750) that could be drawn down to 338 easily. only thing would be freight is a killer from Australia to USA
Actually, Just message Zbench on here... The guy makes allot of Jackets, He might just have a long 338 jacket. Or you might be able to make a deal on a new draw die and jackets.. Who knows... But i would ask him first...
I run into the same problem for my .338. I bought a bunch of RCE .408 jackets to draw down and pinch trim to .338. No one makes a .338 jacket that I am aware of.
What is considered optimum wall thickness for a 338 jacket? And length?
Zbench
For a target bullet I would say somewhere around .010" to .015" thickness, and 1.750 Length.
bullet maker 57 has made some. You may want to ask him.
Did i send you any of mine with the domed base for making BT's in 375??
Happens to be the same length and thickness of a 223 rem piece of brass
I have made the 338s from this 223 brass before but haven't shot any yet, thinking about it and this thread makes me want to get the 338 Edge out and send some 300 grain pills down range again!
Swage on!
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Heres some jackets:
https://centerxbullets.com/product-c...ullet-jackets/
I got jackets from him and I really like them. They come in handy when I am too lazy to make my own. Only slightly more than reforming cases.
BT Sniper, you're kit for making .338 jackets from .223 brass has not been forgotten. Least not by me...I would love to give it a try, when my wife ups my allowance
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |