Lee PrecisionMidSouth Shooters SupplyGraf & SonsStainLess Steel Media
Titan ReloadingADvertise hereRotoMetals2Inline Fabrication

Results 1 to 4 of 4

Thread: Ammunition pouch and slide 50 Cal.

  1. #1
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Mobile, Alabama, formally from Arizona Territory.
    Posts
    457

    Ammunition pouch and slide 50 Cal.

    Since I got the Swedish Rolling blocks I've been looking for a ammo carrier for the cartridges. The slide will work as is, but the pouch I got was not the standard size, I got the magnum since I am going to make a wooden insert with the proper size holes drilled into it for the selected caliber. I have a number of calibers to use this for, some long and some short. 45-70 to 9.3x74R. I thought I would pass this along to anyone who has just got one of the 12,7x44R rolling blocks. These are from Hunter company, the pouch is as I said the magnum size as I wanted to use the same pouch for different calibers, there is a standard size also for those who are only going to use it for one length of brass. The slide is for the S&W 500 revolver brass, it also is from Hunter, and it seems to work just fine. Here are there images.


  2. #2
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Mobile, Alabama, formally from Arizona Territory.
    Posts
    457
    Been working on the ammo blocks. Took forever to get the plastic insert out of the pouch, but it came out minus a few pieces. The blocks are cut, and shaped and the fit good. Next will be to decide on the depths of the drilled cartridge receptors.
    Blocks were made from Poplar wood, it is lightweight and inexpensive.
    Click image for larger version. 

Name:	Photo0671.jpg 
Views:	10 
Size:	37.9 KB 
ID:	220072

    Click image for larger version. 

Name:	Photo0670.jpg 
Views:	10 
Size:	36.3 KB 
ID:	220073



    Click image for larger version. 

Name:	Photo0672.jpg 
Views:	10 
Size:	27.6 KB 
ID:	220074
    Last edited by MOA; 05-10-2018 at 06:07 AM.

  3. #3
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Mobile, Alabama, formally from Arizona Territory.
    Posts
    457
    Updated images on the completion of this project.
    The 400 Jeffery




    The 12,7x44R




    The 9.3x74R







  4. #4
    Boolit Master
    Join Date
    Nov 2011
    Location
    SW Florida
    Posts
    303
    Very nicely done!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check