i missed something, i haven't seen an invoice. is there some change i need to approve?
Invoices (e-mails are not out yet)
for solids will be out in a day or two, for hp molds in aprox 14 days.
All will be explained in e-mail
When e-mails will be sent I will also post here
If it’s not too late I’d like in on this.
westbakke at gmail dot com - HP -.311 - 3 Cavity PB - All Pins - NLG - Zip 78209
I’d also like the handles, unless Lee handles work with your molds.
Last edited by wmb; 12-10-2019 at 01:17 AM.
e-mails for SOLIDS are out!
Any chance I could get an email for a solid as well? I am on for HP but am considering one of each dyecocker1 at gmail dot com
Received my invoice for solid mould!
Sent from my LG-H700 using Tapatalk
Thanks Honcho, paid for mine. I will PM Miha as I already have an account and wasn't sure if I had to use that password provided by Miha. Coupon code does work for the group buy discount.
Got my solid last week, I won’t get to play with it for a while but I hope I get some reports from the rest of y’all on what works best with this guy. For now I will just pet mine and imagine what it will be like to cast with it lol.
90% professional 10% mature
I have been in touch with miha but wanted to get in here too just to be sure blue Jay. Put me down for a.
3 cav HP PB .311 all pins. 37615
camalone1 at comcast dot net
Would also like handles please
Taking the lady to her medical appointment and received a call from the DHL guy. He came to the clinic and I got the package. Opened it up in the clinic. Hahaha. Will post back when I get home with more pics.
Sent from my SM-G950F using Tapatalk
I know it’s sad, but at the time I entered the group buy I was active duty with unlimited access to a USPSA club range. Between then an now I got out to pursue college and now I live in apartment in Houston. Maybe over Christmas break I’ll borrow a garage and set up my pot just to scratch the itch but I don’t have them time or means for real load development. So if you fellas post you experience of what does and doesn’t work with this one I’d love to read.
90% professional 10% mature
Received my 6 cav solids mold last weekend, and spent a little time casting this weekend... Just for kicks and grins I stuffed a couple into 300 BlackOut cases and ran them into my AR to test feeding... I'm concerned about the marks I see on the bullets... I know, they're only a couple of hours old, and I do tend to cast soft... I'll let them age and try again, but here's what I saw on the fresh boolits...
As the photo shows, I bought a Plain Base model with no lube grooves and no hollow point. I plan to Powder Coat, and am happy to not have all the extra cuts. Casting was a breeze!! Open the mold, give a little shake and they all fall out. The upper boolit is as-cast, and the lower boolit is after seating in a case with a Hornady bullet seating die and running it into my AR one time. I seated to the seating mark, and got a COL of 2.220"... Slight crimp to straighten the bell on the case as a separate step.
Attachment 253404
The gouge in the center of the bottom boolit is from pulling it out of the case, so ignore that. The circular line around the tip is from the Hornady seating die. I may need to take the edge off of that... What bothers me most is the deformation at the tip, which I believe was caused by impact with the feed ramp. There appears to be another indentation on the seating mark, oriented at the top of the seating ring in the photo... Not sure what that is from...
So here's my question to all of you: has anyone else seen any marks from feed ramp impacts?? Anyone shot any of these yet??? Is there another thread to discuss loading issues people are encountering with this boolit???
Tks for your input!!!
StratsMan
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |