Well yesterday I took Rosie the 45 caliber under hammer slug gun out to the range to put s few more bullets down the barrel. Last time was about 6 weeks ago and I was hitting the shots inside a 4 inch circle at 200 yards. This was with peep sights and nothing had been changed or adjusted since then!
First 4 shots were NOT even on the backer, let alone on my home made shoot-n-see target in the middle of a plain white backer on a new cardboard holder! So I aimed higher, nothing, lower aim point, nothing. I had already checked my dope book and all was the same: I.E. bullet, lube, wad, powder charge, powder type and height setting on my Lee Shaver tang sight! So I ran the eye piece up 5, nothing, down 5 then another 5 and nothing and finally had another shooter watch the impact for me and he said I was too high. So I aimed at the bottom of the white backer and the bullet showed an impact just above the aim point and right in the middle! So I raised the eye piece 3 and NOTHING showed? Went back to original setting and same impact point. Aimed slightly higher......nothing? So any ideas of what could be happening?
John