C'mon guys, let's do this one.
Don
C'mon guys, let's do this one.
Don
NRA Certified Metallic Cartridge Reloading Instructor
NRA Life Member
Thanks, Don. I appreciate the efforts to keep this amazing mold alive.
It's one of the molds I MOST would love to add to my arsenal of molds.
I have the 38 version, and desperately need this one.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
4 cavity
middle earth sales and service @ g mail . com
Lost one guy and added another. Let's keep this one alive.
Don
NRA Certified Metallic Cartridge Reloading Instructor
NRA Life Member
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I'll take one of these, too
thraxx - (1) 4-cav w/ all pins, NO Handles, Normal shipping - vfluckey at midco dot net - zip: 57110
Mold Number MP-453-395. Rockyert68 at yahoo dot com 1 4cav brass with HP and solid pins Dhl shipping 2 handles. thanks Iron Whittler
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
OOps. I missed the zip code part. 70663-9490. Thanks Iron Whittler
Put me in for two (2), 4 cavity molds.
boo-haaa at hot maildot com
87544
Thanks!
bushog,
You are my hero. Unless my math is wrong (always a possibility), that puts us over the 50% mark and into the Active Group Buy area for this mould.
Don
NRA Certified Metallic Cartridge Reloading Instructor
NRA Life Member
Actually, the current cavity count is 10X4 + 1X2 = 42 cavities. We need 8 more cavities, or two more four cavity molds, to get to the 50 cavities to move it to active. Sorry, but not my rules.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Duke,
What about this in the OP:DonOnce we get 50% of the 20 molds required for production, I will move it to the official active area again.
NRA Certified Metallic Cartridge Reloading Instructor
NRA Life Member
That was posted BEFORE the official rules (created by the owners of this forum) were created.
Those rules are based on the reality that Miha purchases the hollow point inserts for the molds.
He has to buy a minimum of 100 inserts. So, to move to active, we need 50 inserts. Per my previous post, we are at 42 inserts. So, we need 8 more inserts to move to ACTIVE. I'll edit the original post to reflect the correct amount of inserts.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Well shoot, if he’d make a 6 cavity, we’d be ready to roll.
Cmon folks, we just need two more four-cavity molds to get this one active!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |