1. Vintage Lyman Ideal Shotshell Crimper, 12 ga. This is an aluminum, two-part, spring-loaded device that was used with the old Straightline shotshell loaders from the 1950's era. It could be used with any apparatus that applies a compression force. Overall length about 4-3/4”. It will star-crimp a shotshell that has previously been star-crimped. With original Lyman orange box. Price: $15 shipped in the USA. SOLD
Attachment 219770
2. Browning Superposed Shotgun Buttplate (plastic, bakelite ??) Some chips in toe and heel. Overall length = 5-1/8”. Hole spacing = 3-1/4”. No screws. Price: $12 shipped in the USA.
Attachment 219771
3. Integral scope bases and rings. Each of the two bases has four holes, spaced to fit receiver hole spacing of 1/2”, 5/8”, or 7/8”. These were manufactured for the Savage Model 170 rifle, but look like they should fit a variety of rifles having a slightly rounded or flat-top receiver. Includes screws. Package never opened. Price: $18, shipped in the USA.
Attachment 219772
4. Bottom half of Redfield International Match receiver sight. Its back side has a 1/4” x 5/16” groove that would mount to a base attached to the rifle's receiver. There are two vertical holes (spaced 7/8”) in the front half of the base that contain fillers. I don't know if these are original or not. I'd guess not. No elevation plate or screws. Price: $10 shipped in the USA.
Attachment 219774Attachment 219775
5. Knurled steel device that looks to me like a false muzzle. There are no pins, however, and the 0.454” center hole is not rifled. If it is a false muzzle, it was made to slip over a barrel whose ID would measure about 0.85” diameter, which is the inside diameter of a ½-inch-deep recess turned into one end. The other end is flat or squared. Outside diameter measures about 1.23”. Price: $12 shipped in the USA.
Attachment 219776Attachment 219777
6. Weaver Model 849982 Classic T-Series Sun Shade. Matt black. I don't believe this shade has the same threads as the El Paso T-scopes, so I presume it is for the newer T series, whoever makes those ?????. In original box, as new, 4” long, OD about 2.05”, thread OD about 1.92”. Price: $18 shipped in the US.
Attachment 219778
Hope my descriptions are comprehensible. Feel free to ask questions.