Graf & SonsMidSouth Shooters SupplyStainLess Steel MediaInline Fabrication
RotoMetals2Titan ReloadingLee PrecisionADvertise here

Results 1 to 6 of 6

Thread: Ruger No 1 7mm Mag

  1. #1
    Boolit Master
    Join Date
    Jan 2016
    Posts
    633

    Ruger No 1 7mm Mag

    How's the recoil?

    Price seems to vary quite a bit. Is $750 fair? Any particular configuration that's worth less?

    Cast: Am I stuck patching, or can I run the 7mm low and slow? Light for caliber to manage recoil?

    Rebarreling: giant PITA or reasonable?

    Anything in particular to watch for?

  2. #2
    Boolit Master
    Tom W.'s Avatar
    Join Date
    Mar 2005
    Location
    Phenix City, Alabama
    Posts
    2,502
    I put a Limbsaver on mine and the recoil, while it didn't disappear, wasn't bad. It was a #1B. I sold it and a Leupold scope for $1K. I never fired cast from it. I also changed out the trigger and ground the safety down just enough so it wouldn't catch the ejected empties. I liked that rifle a lot, but my hunting days are pretty much over.

    I still have my #1B in 30-06 A.I. though!
    Tom
    μολὼν λαβέ

  3. #3
    Boolit Master

    Loudenboomer's Avatar
    Join Date
    Nov 2007
    Location
    North Western Minnesota
    Posts
    403
    Recoil on the 7 rem mag is not all that bad. If you're familiar with the recoil of a 180gr. 30-06 factory load you wont find the 150gr. 7 mag all that different. Hogdon has a list of lite loads for many calibers with 4895 that may help also.

  4. #4
    Boolit Master

    Join Date
    Apr 2008
    Location
    Phoenix, Arizona
    Posts
    6,162
    I have fired cast in my Encore with 28" barrel. While it did not lead it was not spectacular and I got distracted away from it. IIRC I was pushing a 140gr and 160gr around 2K fps. I think I was using SR4759 but it has been 5 years or more since shooting cast in it.

  5. #5
    Boolit Master
    Join Date
    Mar 2005
    Posts
    3,432
    I have the boat anchor heavy #1S with the iron sights and the heavy barrel. Recoil is about like a .30-06.
    My rifle has a chamber that is on the large side diameter wise.
    It rarely groups better than 1.25" at 100 yards.
    EDG

  6. #6
    Boolit Master gnostic's Avatar
    Join Date
    Jan 2014
    Location
    Somewhere over the rainbow...
    Posts
    296
    I have a #1 in 6mm Remington that shoots under an inch, with a 75 grain 'J' moly bullet. It's free floated. So the rest has to be close to the action or it strings a bit. It took me awhile to figure that out. When I shot from a bipod, the forend touched the barrel and the group opened up vertically. I'm about to load some 95 grain cast from an RCBS mold, with 11 grains of Unique...
    Last edited by gnostic; 05-10-2018 at 02:14 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check