I give you credit. I have yet the brass ones to try something like this. But I will be giving HPing a mould a try this weekend. I think you did good. Just need a better point. I mean the sizer will fix any mistakes right.
Stop being blinded by your own ignorance.
I thought about using one to make pound cast slugs in a couple different calibers. Thought maybe a 223 mold, and just drill them out. That's one great thing about Lee molds, you mess one up, they're cheap to replace.
"Freedom is the sure possession of those alone who have the courage to defend it."
~Pericles~
If I drilled the tip with a couple if decending bits might get a staggered tip. Might could use these lead projectiles to "fire" shoot lap a barrel?
Maybe if you drilled undersized you could have used 6mm bullets to lap the inside of the drilled hole??
"Freedom is the sure possession of those alone who have the courage to defend it."
~Pericles~
The drill definitely tears at the aluminum mold. Oil the bit and keep removing the aluminum chips frequently.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |