Hello,
I am in France and need a load for a 140gn cast boolit (RCBS mould) with a powder(s) I can buy here. For example Vectan or Norma etc. I am really stuck. Can somebody please help me?
Thanks
Hello,
I am in France and need a load for a 140gn cast boolit (RCBS mould) with a powder(s) I can buy here. For example Vectan or Norma etc. I am really stuck. Can somebody please help me?
Thanks
With Norma you can use 204, 205, MRP, and MRP2. With Vectan you can use TU7000 and TU8000. I haven't any loads for those powders as I don't use them, but you should not get into trouble with them as they are very very slow. You will have to work up a load. The 6.5 Swede is bottlenecked enough to help those powder burn.
Size the bullet the fatest that it drops from the mold. I doubt that it exceeds .268. The 6.5 Swede has really a large groove diameter. Don't worry about the cartridge fitting the chamber with a fat cast bullet as it has ample room.
Thanks !
GreglaROCHE,
Find the slowest powder available then use it with the largest boolit you can chamber. My Swedes love WC860 (or AA870) powder and .268" diameter 140 grain boolits cast from 50/50 COWW and Lino. Velocities in the 1800-1850 fps seem to work best with the Swede's 1 turn in 7.5 inch twist rate. My 1900 Carl Gustov M96 will put 10 shots into a 2 inch circle at 100 yards from the bench with this formula.
Hello Greg,
pls have a look to my thread Range Day Mauser Infantrie Rifle Mod. 1896 in January this Year.
I use Lovex Powder but the nearly same load i use with Vectan BA9 before
regards
Klaus
http://www.vectan.fr/UK/reloading-charges
Here is a French website from Vectan.
I Cast my Boolits, Therefore I am Happy.
Bona Fide member of the Jeff Brown Hunt Club
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |