RotoMetals2StainLess Steel MediaTitan ReloadingInline Fabrication
Graf & SonsMidSouth Shooters SupplyADvertise hereLee Precision

Results 1 to 18 of 18

Thread: 41 MP Mold 413-265-WNFP

  1. #1
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,064

    41 MP Mold 413-265-WNFP

    This is a heavy .41 caliber with all sorts of potential and versatility. Nose to crimp on this big bad boy is .430" so it should be perfect for the Ruger Blackhawks and Redhawks, I will measure my Smith shortly and get on here and edit that one in. As drawn it shows a Large, Medium, and cup Hollowpoints and of course a Solid Pin option. Gas Check and Plain base options as well as 2 or 4 cavity molds will be available. I can remember shooting a similar cast bullet at a rock at a bit over 600 yards with some friends. It is difficult to explain without having had you there to see, but this style shoots flatter, bucks the wind better, and gets there with a serious WHOP than most of the other sixgun calibers we were shooting that windy day.

    As always, to sign up, we need your DISGUISED email address like this: sixgunman AT anynet DOT com
    We also need to know 2 or 4 cavity, GC or Plain Base preference.
    Invoice is via Email and payment is via Pay Pal.
    Miha will set the prices when the time comes.
    This mold is being run elsewhere so SIGN UP as it will likely close abruptly.

    Large HP = - 17 gr. off bullet weight
    Med HP = - 10 gr. off bullet weight
    Cup HP = - 6 gr. off bullet weight

    All pins come with mold. Large, Med, cup and blank pins. You can request a penta pin but I can't say for sure if Miha will include one or not.



    2 Cavity GC List

    01.
    02. Jem102....2 cavity, GC, all pins. jem10 at bellsouth dot net....1 mold

    2 Cavity PB list

    01. alamogunr AT charter DOT net....1 mold

    4 Cavity GC List

    01. Evoevil....evoevil AT AOL DOT COM.....1 mold
    02. 475/480....spharper... at ....sbcglobal.....dot ...net....1 mold (add penta pin)
    03. DW475....dcw038 at msn dot com....1 mold

    4 Cavity PB List

    01. Lefty SRH....Schockley at icloud dot com....1 mold
    02. Osteodoc08....t o m g arc ia 15 at yahoooooo dot cooom....1 mold
    Last edited by 2 dogs; Yesterday at 02:13 PM.

  2. #2
    Boolit Master
    Join Date
    Mar 2018
    Posts
    194
    4 cavity, GC All pins .413
    evoevil ..... at ....AOL...... dot......COM

  3. #3
    Boolit Master 475/480's Avatar
    Join Date
    Mar 2005
    Location
    Houston,Tx
    Posts
    789
    4 cavity, GC - all pins and a pinta pin
    spharper... at ....sbcglobal.....dot ...net

  4. #4
    Boolit Master DW475's Avatar
    Join Date
    Jun 2013
    Location
    Idaho
    Posts
    160
    2 cavity, GC & all pins.
    dcw038 at msn dot com

  5. #5
    Boolit Master
    Lefty SRH's Avatar
    Join Date
    May 2011
    Location
    Athens, AL
    Posts
    1,985
    4 cavity, PB, all the pins
    Schockley at icloud dot com
    "In GOD We Trust"

  6. #6
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,064
    Updated 4 molds

  7. #7
    Boolit Master DW475's Avatar
    Join Date
    Jun 2013
    Location
    Idaho
    Posts
    160
    Can I change mine to a 4 Cavity mold, GC with all the pins. Thank You!
    dcw038 at msn dot com
    Last edited by DW475; 05-09-2018 at 01:01 AM.

  8. #8
    Boolit Master
    Join Date
    Feb 2013
    Posts
    237
    Any chance of getting a 4 cavity with 2 PB and 2 GC?

  9. #9
    Boolit Buddy
    Join Date
    Sep 2015
    Location
    East TN
    Posts
    55
    2 cavity, GC, all pins. jem10 at bellsouth dot net

  10. #10
    Moderator

    Join Date
    Jun 2013
    Posts
    4,621
    4 cav PB , all pins

    t o m g arc ia 15 at yahoooooo dot cooom

  11. #11
    Boolit Master
    Join Date
    Mar 2018
    Posts
    194
    this should bump up to the top ......... we need more

  12. #12
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,064
    Quote Originally Posted by DW475 View Post
    Can I change mine to a 4 Cavity mold, GC with all the pins. Thank You!
    dcw038 at msn dot com
    Got it. Please check my work Sir.

  13. #13
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,064
    Quote Originally Posted by silverjay View Post
    Any chance of getting a 4 cavity with 2 PB and 2 GC?
    The Cramer style molds wont work that way Sir.

  14. #14
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,064
    Updated 7 molds

  15. #15
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,064
    Quote Originally Posted by evoevil View Post
    this should bump up to the top ......... we need more
    This mold is being run concurrently on at least one other website that I am aware of. It is already at 15 molds over there so there is 22 in total thus Miha could close this at any time. I would suggest anyone interested not sit on the fence.

  16. #16
    Boolit Master DW475's Avatar
    Join Date
    Jun 2013
    Location
    Idaho
    Posts
    160
    I requested to change from the 2 cavity to 4 cavity but it looks like i'm down for both molds. Please ensure i'm down for just the 4 cavity mold.
    Thanks.

  17. #17
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    3,192
    Put me down for one 2 cavity, Plain Base (If possible). If no one else wants a plain base, I'll take a GC if that makes it easier.

    alamogunr AT charter DOT net

    BTW My S&W 657 cylinder measures 1.780" OAL. I have seen case lengths up to 1.290". Starline, which I prefer, gives a range of 1.275-1.285. This boolit should work in Rugers and Smiths. Should give 1/16" + clearance. Somebody should confirm that.
    John
    W.TN

  18. #18
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    3,192
    Please disregard previous post. I don't drink or do drugs but I must have been on something when I posted the measurements of the S&W cylinder. This morning I measured the cylinder length of the Ruger .41 Mag Bisley. It measured 1.672". Something had to be off. Ruger cylinders are not shorter than S&W. I re-measured the S&W 657 and got 1.670.
    Last edited by alamogunr; 05-23-2018 at 06:09 PM. Reason: Remove last sentence concerning mold
    John
    W.TN

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check